flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Zaha Hadid unveils 'interlocking lattice' design for luxury apartments in Monterrey, Mexico

Multifamily Housing

Zaha Hadid unveils 'interlocking lattice' design for luxury apartments in Monterrey, Mexico

Hadid's scheme was inspired by the Mexican tradition of interlocking lattice geometries.


By BD+C Staff | May 19, 2015
Zaha Hadid unveils 'interlocking lattice' design for luxury apartments in Monterrey, Mexico

The orientation of each unit softens sun exposure, while the façade material reflects the sun's rays. Renderings courtesy Zaha Hadid Architects

London-based Zaha Hadid Architects unveiled its design for a luxury multifamily project in Huajuco Canyon, Monterrey, Mexico, Gizmag reports.

The complex, called Esfera City Cemyer, is made out of a nine-story building taking the form of a U-shape, with 981 apartments spread over 1.4 million sf—a design which the architects call “community orientated.”

Units will vary from small lofts of 484 sf to four-bedroom apartments up to 1,776 sf. The orientation of each apartment will help reduce the effects of the sun.

Built adjacent to a 7.4-acre public park, residents will have easy access to the outdoors, as well as a clubhouse with a café, exercise room, workshop, and reading room.

“The building’s envelope references the local architectural language and Mexican tradition of interlocking lattice geometries to provide shading and describe the outdoor space of each residence,” the firm said in a statement. “These lattice geometries have been used widely throughout pre-Columbian, colonial, and contemporary Mexican architecture to give protection from the sun and generate varied and dynamic displays of light and shadow.”

According to Gizmag, this low-rise, high-density project is slated for completion in 2018.

 

boombox1 - default
boombox2 -
native1 -

More In Category


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021