Porcelanosa, a maker and distributor of luxury tile, kitchen, and bath products, recently completed the conversion of the former Commodore Criterion building in New York into an 18,000-sf, seven-floor showroom that opened in September.
The showroom, Porcelanosa’s 25th in the U.S., displays more than 1,000 products, notably those made from Krion, Porcelanosa’s solid-surface product for countertops, vanities, and furniture. But even Porcelanosa could not have anticipated that Krion would also serve as panels of a retractable ceiling over the showroom’s main entrance.
One of Porcelanosa’s design demands was no dropped ceilings. So how would wiring and systems that run behind the ceiling be accessible? “There’s a lot of stuff back there,” says Joe Patrovich, Director of Operations for Modworxx, an architectural millwork supplier.
To meet the client’s aesthetic requirement, Modworxx devised a mechanical system with motor-operated pulleys that raise and lower rectangular and triangular Krion panels set on hinges along the ceiling’s perimeter. When those panels open, other panels in the center section of the ceiling slide horizontally on roller tracks into those spaces.
All told, 39 panels cover 1,300 sf of ceiling space. Key switches at the showroom’s mezzanine level control each panel’s movement. Patrovich says the system cost about $350,000.
Santiago Manent, Sales and Marketing Director for Porcelanosa USA, notes the ceiling surface reflects a floor-to-ceiling 26x16-foot LED screen that’s visible from the street, making the screen look double its size.
Foster + Partners was the showroom designer. Americon was the GC.
Photo: MODWORXX
Photo: MODWORXX
Related Stories
| Jun 19, 2012
Armstrong Issues Environmental Product Declarations On Nine Popular Ceiling and Steel Suspension Systems
Transparent new documentation allows end users to make more informed decisions when selecting ceilings for projects
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| May 31, 2012
Product Solutions June 2012
Curing agents; commercial faucets; wall-cladding systems.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.
| Apr 3, 2012
Product Solutions
Two new PV systems; a lighter shelf; and fire alarm/emergency communication system.
| Feb 17, 2012
Tremco Inc. headquarters achieves LEED Gold certification
Changes were so extensive that the certification is for new construction and not for renovation; officially, the building is LEED-NC.
| Feb 2, 2012
Call for Entries: 2012 Building Team Awards. Deadline March 2, 2012
Winning projects will be featured in the May issue of BD+C.
| Jan 3, 2012
New SJI Rule on Steel Joists
A new rule from the Steel Joist Institute clarifies when local reinforcement of joists is required for chord loads away from panel points. SJI members offer guidance about how and when to specify loads.