flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

New Jersey Supreme Court puts control of affordable housing agency in the courts

Multifamily Housing

New Jersey Supreme Court puts control of affordable housing agency in the courts

The unanimous ruling transfers agency’s regulatory authority.


By Peter Fabris, Contributing Editor | March 16, 2015
New Jersey Supreme Court puts control of affordable housing agency in the courts

The ruling comes after a decade of litigation over the agency's proposed rules to determine municipalities' housing obligations for low- and moderate-income residents. Photo: Rgkleit via Wikimedia Commons

The New Jersey Supreme Court said the state’s affordable housing agency had failed to do its job, and effectively transferred the agency's regulatory authority to lower courts, according to the Philadelphia Inquirer.

The ruling comes after a decade of litigation over the agency's proposed rules to determine municipalities' housing obligations for low- and moderate-income residents. The court’s unanimous decision came in response to a lawsuit by affordable-housing advocates alleging that Gov. Chris Christie’s administration had failed to meet a court-ordered deadline to issue regulations that require towns to provide for the realistic construction of affordable housing.

The court said the administrative process by which municipalities submit housing plans to the state Council on Affordable Housing (COAH) "has been rendered futile." Therefore, courts must step in, the justices said. The ruling may prompt extensive litigation against local communities alleged to have failed to provide their fair share of affordable housing

A Christie spokesman said the ruling was "a call to action to finally finish the job of reforming our affordable housing system so that it is no longer a costly burden to the people of New Jersey and actually encourages sound development."

Related Stories

| Oct 2, 2014

Effective use of building enclosure mock-ups within the commissioning process

Engineers from SSR offer advice and guidelines on implementing building enclosure mockups on any project.

Sponsored | | Sep 8, 2014

Metal roof and wall panels provide strong wind resistance

In areas that experience strong winds, metal roof and wall panels provide a sturdy, well-tested option for building envelope design.

| Sep 7, 2014

Building the cladding palette: panels, rainscreens, and veneers [AIA course]

When it comes to cost, performance, and aesthetics—not to mention maintenance and long-term resilience—the evaluation of cladding materials and façade systems is more complex than ever. This course is worth 1.0 AIA CES HSW learning units.

Sponsored | | Aug 16, 2014

Fire-rated framing system makes the grade at Johnson & Wales University Center

The precision engineering of TGP’s Fireframes Aluminum Series creates narrow profiles and crisp sightlines at Johnson & Wales University Center for Physician Assistant Studies

| Jul 17, 2014

A harmful trade-off many U.S. green buildings make

The Urban Green Council addresses a concern that many "green" buildings in the U.S. have: poor insulation.

| Jul 1, 2014

Sochi's 'kinetic façade' may steal the show at the Winter Olympics

The temporary pavilion for Russian telecom operator MegaFon will be wrapped with a massive digital "pin screen" that will morph into the shape of any face.

Sponsored | | Jun 4, 2014

Fiber cement panels bridge historic and modern at Minneapolis apartment complex

The design team for the Third North apartment complex specified Nichiha’s Illumination Series architectural panels in a blend of six colors—divided into swaths of reds and swaths of grays—that combine with a rectilinear shape to complement nearby brick.

| May 27, 2014

Fire Rated Glass contributes to open lab environment at JSNN

Openness and transparency were high priorities in the design of the Joint School of Nanoscience & Nanoengineering within the Gateway University Research Park in Greensboro, N.C. Because the facility’s nanobioelectronics clean room houses potentially explosive materials, it needed to be able to contain flames, heat, and smoke in the event of a fire. SPONSORED CONTENT 

| May 27, 2014

Contractors survey reveals improving construction market

The construction industry is on the road to recovery, according to a new survey by Metal Construction News. Most metrics improved from the previous year’s survey, including a 19.4% increase in the average annual gross contracting sales volume. SPONSORED CONTENT

| May 20, 2014

Kinetic Architecture: New book explores innovations in active façades

The book, co-authored by Arup's Russell Fortmeyer, illustrates the various ways architects, consultants, and engineers approach energy and comfort by manipulating air, water, and light through the layers of passive and active building envelope systems.

boombox1 - default
boombox2 -
native1 -

More In Category

Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021