The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.
The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.
April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.
| Percent Change in ..... | 1 month | 3 months | 12 months | 3 years |
| Source: Producer Price Index. Bureau of Labor Statistics | ||||
| Construction commodities | ||||
| Cement | 0.8 | -0.2 | 0.0 | 6.1 |
| Construction sand, gravel & crushed stone | 0.5 | 1.4 | 5.5 | 23.1 |
| Softwood plywood | -3.3 | -4.9 | -12.7 | -21.1 |
| Softwood lumber | 1.6 | -2.6 | -10.7 | -32.5 |
| Manufactured materials | ||||
| Gypsum products | -0.2 | -1.2 | 5.3 | -17.5 |
| Diesel fuel | 20.5 | -2.6 | -56.2 | -30.6 |
| Paint | 0.1 | 0.1 | 12.4 | 22.5 |
| Plastic construction products | -0.5 | -0.6 | 3.0 | 1.9 |
| Vitreous plumbing fixtures | 2.3 | 2.4 | 4.2 | -1.9 |
| Ceramic tile | -2.0 | -1.4 | -0.2 | 1.6 |
| Flat glass | -0.4 | -1.0 | 2.9 | 2.7 |
| Hot-rolled bars, plates, and structural shapes | -7.3 | -15.7 | -25.9 | -2.0 |
| Extruded aluminum rod, bar, and other shapes | 1.2 | -4.3 | -26.3 | -18.2 |
| Architectural metalwork | 0.6 | -2.4 | 12.1 | 24.7 |
| Metal plumbing fixtures | 0.5 | 0.2 | 2.2 | 13.1 |
| Builders' hardware | 0.5 | -2.7 | 6.8 | 20.4 |
| Sheet metal products | -0.6 | -3.6 | 0.2 | 9.9 |
| Nonferrous pipe and tube | 20.9 | 26.7 | -28.5 | -1.3 |
| Building brick | 0.5 | -0.2 | 0.1 | 0.8 |
| Ready-mix concrete | -1.0 | -1.9 | 3.4 | 10.7 |
| Concrete block and brick | 0.3 | -0.1 | 3.3 | 10.1 |
| Millwork (window, door, cabinet) | -0.2 | 0.7 | 1.7 | 5.3 |
| Engineered wood products | -1.3 | -3.3 | -2.6 | -14.6 |
| Metal doors, sash, and trim | -0.8 | 0.2 | 5.4 | 9.2 |
| Summary | ||||
| Construction materials (commodity level) | -2.3 | -3.1 | -1.7 | 4.9 |
| Inputs to construction industries | -0.4 | -1.6 | -3.6 | 6.4 |
| Inputs to nonresidential construction | -0.3 | -1.6 | -5.2 | 6.3 |
Related Stories
| Aug 11, 2010
Great Solutions: Business Management
22. Commercial Properties Repositioned for University USE Tocci Building Companies is finding success in repositioning commercial properties for university use, and it expects the trend to continue. The firm's Capital Cove project in Providence, R.I., for instance, was originally designed by Elkus Manfredi (with design continued by HDS Architects) to be a mixed-use complex with private, market-...
| Aug 11, 2010
Seven tips for specifying and designing with insulated metal wall panels
Insulated metal panels, or IMPs, have been a popular exterior wall cladding choice for more than 30 years. These sandwich panels are composed of liquid insulating foam, such as polyurethane, injected between two aluminum or steel metal face panels to form a solid, monolithic unit. The result is a lightweight, highly insulated (R-14 to R-30, depending on the thickness of the panel) exterior clad...
| Aug 11, 2010
Nurturing the Community
The best seat in the house at the new Seahawks Stadium in Seattle isn't on the 50-yard line. It's in the southeast corner, at the very top of the upper bowl. "From there you have a corner-to-corner view of the field and an inspiring grasp of the surrounding city," says Kelly Kerns, project leader with architect/engineer Ellerbe Becket, Kansas City, Mo.
| Aug 11, 2010
AIA Course: Historic Masonry — Restoration and Renovation
Historic restoration and preservation efforts are accelerating throughout the U.S., thanks in part to available tax credits, awards programs, and green building trends. While these projects entail many different building components and systems, façade restoration—as the public face of these older structures—is a key focus. Earn 1.0 AIA learning unit by taking this free course from Building Design+Construction.
| Aug 11, 2010
AIA Course: Enclosure strategies for better buildings
Sustainability and energy efficiency depend not only on the overall design but also on the building's enclosure system. Whether it's via better air-infiltration control, thermal insulation, and moisture control, or more advanced strategies such as active façades with automated shading and venting or novel enclosure types such as double walls, Building Teams are delivering more efficient, better performing, and healthier building enclosures.
| Aug 11, 2010
Glass Wall Systems Open Up Closed Spaces
Sectioning off large open spaces without making everything feel closed off was the challenge faced by two very different projects—one an upscale food market in Napa Valley, the other a corporate office in Southern California. Movable glass wall systems proved to be the solution in both projects.
| Aug 11, 2010
AIA course: MEP Technologies For Eco-Effective Buildings
Sustainable building trends are gaining steam, even in the current economic downturn. More than five billion square feet of commercial space has either been certified by the U.S. Green Building Council under its Leadership in Energy and Environmental Design program or is registered with LEED. It is projected that the green building market's dollar value could more than double by 2013, to as muc...
| Aug 11, 2010
BIM adoption tops 80% among the nation's largest AEC firms, according to BD+C's Giants 300 survey
The nation's largest architecture, engineering, and construction companies are on the BIM bandwagon in a big way, according to Building Design+Construction's premier Top 50 BIM Adopters ranking, published as part of the 2009 Giants 300 survey. Of the 320 AEC firms that participated in Giants survey, 83% report having at least one BIM seat license in house, half have more than 30 seats, and near...
| Aug 11, 2010
Thrown For a Loop in China
While the Bird's Nest and Water Cube captured all the TV coverage during the Beijing Olympics in August, the Rem Koolhaas-designed CCTV Headquarters in Beijing—known as the “Drunken Towers” or “Big Shorts,” for its unusual shape—is certain to steal the show when it opens next year.
| Aug 11, 2010
Tall ICF Walls: 9 Building Tips from the Experts
Insulating concrete forms have a long history of success in low-rise buildings, but now Building Teams are specifying ICFs for mid- and high-rise structures—more than 100 feet. ICF walls can be used for tall unsupported walls (for, say, movie theaters and big-box stores) and for multistory, load-bearing walls (for hotels, multifamily residential buildings, and student residence halls).
