flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Toronto suburb to build the largest hospital in Canada

Projects

Toronto suburb to build the largest hospital in Canada

Global firm Stantec will design the 24-floor facility.


By Novid Parsi, Contributing Editor | March 18, 2022
Mississauga Hospital aerial
The new hospital will triple the care capacity of the original facility.

A new hospital in Ontario will nearly triple the care capacity of its existing facility—becoming the largest hospital in Canada. 

In Mississauga, a suburb of Toronto, hospital system Trillium Health Partners (THP) will fully replace its Mississauga Hospital with a new facility that will increase the number of operating rooms from 14 to 23 and include more than 950 beds. At approximately 2.8 million square feet and 24 floors, the new Mississauga Hospital will feature modern hospital facilities and technology and reflect the latest standards in infection prevention and control.

Mississauga Exterior
The new facility will have 24 floors.

THP’s emergency department, one of the busiest in Canada, will significantly expand to improve patient experience and reduce wait times. The hospital will house advanced diagnostic imaging facilities and a new pharmacy and clinical laboratory. And it will continue to deliver specialized care through regional programs, such as the regional center for advanced cardiac surgery and neurosurgery services, among others.

With design and engineering services by global integrated design firm Stantec, the new Mississauga Hospital will be a critical part of THP’s plan to provide healthcare that serves the growing community for decades to come.

Mississauga aerial 2
The hospital was designed by Stantec.

“Critical health infrastructure, like Trillium Health Partners’ Mississauga site, are essential to advance quality healthcare in Ontario and keep our diverse communities healthy,” Suzanne Crysdale, Stantec principal, says in a statement.

Mississauga Hospital marks the second Stantec project for THP. In December, Stantec announced it will provide design and engineering services for a nine-floor, 600,000-square-foot patient tower with over 350 beds.

In recent years, Stantec has designed several major healthcare projects in Ontario, including Cortellucci Vaughan Hospital’s 1.2 million-square-foot facility; Cambridge Memorial Hospital’s patient care wing; Brockville General Hospital’s complex for continuing care, mental health, and rehabilitation; and Centre for Addiction and Mental Health’s redevelopment project.

Related Stories

Urban Planning | Apr 12, 2023

Watch: Trends in urban design for 2023, with James Corner Field Operations

Isabel Castilla, a Principal Designer with the landscape architecture firm James Corner Field Operations, discusses recent changes in clients' priorities about urban design, with a focus on her firm's recent projects.

Market Data | Apr 11, 2023

Construction crane count reaches all-time high in Q1 2023

Toronto, Seattle, Los Angeles, and Denver top the list of U.S/Canadian cities with the greatest number of fixed cranes on construction sites, according to Rider Levett Bucknall's RLB Crane Index for North America for Q1 2023.

Contractors | Apr 10, 2023

What makes prefabrication work? Factors every construction project should consider

There are many factors requiring careful consideration when determining whether a project is a good fit for prefabrication. JE Dunn’s Brian Burkett breaks down the most important considerations. 

Architects | Apr 6, 2023

New tool from Perkins&Will will make public health data more accessible to designers and architects

Called PRECEDE, the dashboard is an open-source tool developed by Perkins&Will that draws on federal data to identify and assess community health priorities within the U.S. by location. The firm was recently awarded a $30,000 ASID Foundation Grant to enhance the tool. 

Sustainability | Apr 4, 2023

NIBS report: Decarbonizing the U.S. building sector will require massive, coordinated effort

Decarbonizing the building sector will require a massive, strategic, and coordinated effort by the public and private sectors, according to a report by the National Institute of Building Sciences (NIBS).

Healthcare Facilities | Mar 26, 2023

UC Davis Health opens new eye institute building for eye care, research, and training

UC Davis Health recently marked the opening of the new Ernest E. Tschannen Eye Institute Building and the expansion of the Ambulatory Care Center (ACC). Located in Sacramento, Calif., the Eye Center provides eye care, vision research, and training for specialists and investigators. With the new building, the Eye Center’s vision scientists can increase capacity for clinical trials by 50%.

Healthcare Facilities | Mar 25, 2023

California medical center breaks ground on behavioral health facility for both adults and children

In San Jose, Calif., Santa Clara Valley Medical Center (SCVMC) has broken ground on a new behavioral health facility: the Child, Adolescent, and Adult Behavioral Health Services Center. Designed by HGA, the center will bring together under one roof Santa Clara County’s behavioral health offerings, including Emergency Psychiatric Services and Urgent Care. 

Healthcare Facilities | Mar 22, 2023

New Jersey’s new surgical tower features state’s first intraoperative MRI system

Hackensack (N.J.) University Medical Center recently opened its 530,000-sf Helena Theurer Pavilion, a nine-story surgical and intensive care tower designed by RSC Architects and Page. The county’s first hospital, Hackensack University Medical Center, a 781-bed nonprofit teaching and research hospital, was founded in 1888.

Project + Process Innovation | Mar 22, 2023

Onsite prefabrication for healthcare construction: It's more than a process, it's a partnership

Prefabrication can help project teams navigate an uncertain market. GBBN's Mickey LeRoy, AIA, ACHA, LEED AP, explains the difference between onsite and offsite prefabrication methods for healthcare construction projects.

Modular Building | Mar 20, 2023

3 ways prefabrication doubles as a sustainability strategy

Corie Baker, AIA, shares three modular Gresham Smith projects that found sustainability benefits from the use of prefabrication.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021