Norway spruce has recently passed muster from strength testing to be used for a number of construction applications. The species was approved by the American Lumber Standards Committee (ALSC) in October for use in home construction areas such as wall studs, floor and ceiling joists, and industrial applications.
It is the first new U.S.-grown softwood species to be fully tested for strength values since the initial process for assigning design values from testing of wood samples began in the 1920s.
Norway spruce samples were destructively tested, and lumber strength data was calculated for the entire spectrum of design values: Modulus of Elasticity (MOE), Fiber Stress in Bending, Tension Parallel to Grain, Horizontal Shear, and Compression Parallel and Perpendicular to Grain.
Once cut into logs, Norway spruce is virtually indistinguishable from native eastern spruce species, with even the most experienced of graders not able to discern one species from the other, according to a press release from Northeaster Lumber Manufacturers Association.
About 50% of Norway spruce is located throughout New York State. The species can also be found in Maine, down into southern New England, and as far west as Wisconsin.
Related Stories
Wood | Apr 29, 2016
Anders Berensson Architects designs 40-story wooden skyscraper for Stockholm
The structure, which will be made entirely out of cross-laminated timber, will rise 436 feet into the air, making it Stockholm’s tallest building.
Wood | Apr 22, 2016
Revised 2015 Manual for Engineered Wood Construction available
American Wood Council Document offers design information for structural applications.
Structural Materials | Apr 13, 2016
How post-frame construction has evolved over the years [Infographic]
The National Frame Building Association released an infographic showing just how far the industry has come since the colonial Jamestown days.
Wood | Apr 8, 2016
New LEED Pilot ACP designed to help eliminate irresponsibly sourced materials
Illegal wood is primary target to restrict illicit material in the supply chain.
Wood | Mar 28, 2016
Waugh Thistleton designs one of the tallest timber office buildings in London
The nine-story Development House has vertical open spaces for light and air flow.
Wood | Mar 23, 2016
APA updates Engineered Wood Construction Guide
Provides recommendations on engineered wood construction systems.
Wood | Feb 8, 2016
BEST IN WOOD: WoodWorks announces 2016 design award winners
The Aspen Art Museum, Scott Family Amazeum, and Whitetail Woods Regional Park Camper Cabins are among the projects honored by this year’s awards.
Wood | Feb 3, 2016
American Wood Council releases guide to wood construction in high wind areas
The guide is directed toward ensuring structural integrity to resist wind loads.
Wood | Jan 4, 2016
Concerns over new wood-frame, mid-rise residential building construction in Charlotte
Cheaper construction material may increase risk for firefighters.
Sponsored | Wood | Dec 7, 2015
Compelling conversations about wood: Engineered wood as expressive design
This installment features a wide-ranging discussion that reveals how a mix of engineered wood products lend themselves to expressive design — and what’s blocking today’s designers from fully embracing this aesthetic.
