American Institute of Architects’ 2017 updates of contract documents provide detailed guidelines on how to devise and assign responsibility for sustainable elements of a construction project.
Key points of Document E204–2017 include:
- A requirement for the architect and owner to hold a sustainable design feature workshop
- Delineation of testing and implementation strategies to achieve sustainability goals
- Allocation of responsibility for sustainable measures
Other provisions address specific sustainable issues such as materials substitutions, construction waste management, registration with certifying authority, and achieving a sustainable objective at substantial and final completion. The overall sustainability plan is defined as a contract document.
Owners, architects, and contractors are expected to understand the sustainability plan and their responsibilities in performing measures that are assigned to them. The document states that the contractor does not guarantee achievement of the sustainable objective (such as LEED certification) but is responsible if the company fails to live up to its duties to perform sustainable measures assigned to it.
E204 is meant as an attachment to the owner-architect agreement, the owner-contractor agreement, and other project-related agreements as appropriate. This document replaces earlier documents D503–2011 and A141–2014 Exhibit C. The latter was meant specifically for design/build contracts. The new document addresses sustainability for projects of all types of delivery methods.
For more information, visit: www.aiacontracts.org.
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.