flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

8 ways to cool a factory

Industrial Facilities

8 ways to cool a factory

Industrial facility design can address factory overheating and promote worker wellness in manufacturing plants.


By Sergio Sádaba, Principal | Stantec | June 8, 2024
Large industrial ceiling fan
Large industrial ceiling fan

For most industrial factories, it’s process over people. The “human factor” comes in second place. In many North American factories, even those that make electric vehicles, this has translated into potentially sweltering, uncomfortable places. They can often make workers unproductive and, in some cases, unwell.

From a doing-the-right-thing perspective, it makes sense to put people and wellness first in today’s industrial facilities. And there are bottom-line reasons to emphasize worker comfort in the factory. The US manufacturing sector is booming. In a flourishing job market, and industrial workers have increasing choices of where to work. The hotter and unhealthier the factory floor, the more likely it is that workers will look to transfer out as soon as they can.

Recruiting and training new staff is costly. Manufacturing has one of the highest costs to hire, estimated at $5,100 by RecruiterBox. Deloitte says the US manufacturing sector could have a shortage of 2.1 million skilled jobs by 2030. Thus, worker retention is a bottom-line issue.

Blurred image of the production floor in a factory.
Manufacturing plants are often extremely hot. The industrial activities that take place may require melting or forming substances. And the workers move a lot. Photo courtesy Stantec

Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace. As a buildings-performance expert, I have decades of experience designing high-performance, sustainable, and energy-efficient systems for a variety of industrial clients. These include advanced manufacturers. And I see plenty of ways to design for wellness in industrial spaces.

What are the heat issues in manufacturing plants?

First, we need to understand that these manufacturing plants and similar facilities, by their nature, can be extremely hot. The industrial activities that take place in these plants may require melting and forming substances. The heat required to melt material radiates through the space. And factory work is active. Movement creates heat. The work may also require personal protective equipment, which heats up the body. All these things influence the thermal comfort—or discomfort—of those working in the factory. The U.S. Occupational Safety and Health Administration (OSHA) warns that some conditions have a great danger of heat stroke. But only a few states have heat standards for workers, and those are generally concerned with agriculture.

Most of these plants don’t have air conditioning. They are built on a budget. They leak air. They occupy huge volumes of space. Some might have some fans, but the truth is that these places get so hot that they open the doors to let the heat out. Even when it’s 100 degrees outside.

US code usually requires employers to maintain a minimum temperature, not a maximum.

Southern states such as Texas, Florida, and Georgia are seeing their manufacturing sectors grow. And heat issues, like climate, are regional. Companies with multiple locations may find that their factories in Northern states rarely have thermal comfort issues. However, their Nashville, Charlotte, or Oklahoma City facilities often do.

Large industrial ceiling fan
Large, slow fans circulate the air and improve ventilation in industrial factories. Photo courtesy Stantec

The issue is serious. It’s not unheard of for workers to faint under these conditions. Between 1992 and 2017, heat stress injuries killed 815 US workers, according to OSHA. More often, however, workers are leaving jobs due to the heat. Data in some areas shows a correlation between rising outdoor temperatures and worker resignations.

Health and safety are part of our design culture at Stantec. And no one should be investing in a plant that’s so uncomfortable it can’t hold onto its skilled staff. So, what are manufacturers’ options for retrofitting their existing plants?

Let’s look at interventions, from light to heavy, that can promote thermal comfort in factories.

1. Promote effective ventilation

We want to make sure the air in the factory is moving. So, our team designs more effective ventilation for these spaces. When cross ventilation occurs at a high level in factory spaces, it can result in stratification, meaning that little of the ventilated air reaches the occupants at floor level. In our analysis of overheated factory buildings in the South, we often encounter situations such as wall-mounted air louvers that don’t have fans to direct air toward areas where the workers are.

With good design, we can direct the incoming air to the right places. We often use large, slow ceiling-mounted fans (such as those made by Big Ass Fans) in our design for industrial spaces. These provide additional air circulation, which has a cooling effect. Fan placement is critical to effective air circulation.

2. Exhaust the hot air

We can locate the exhaust where the heat sources are, use fans to direct the heat out of the building and avoid mixing it into the main air supply. We can design systems that isolate the hotter areas, say shops where materials are melted down, and direct that hot air away toward exhaust systems.

3. Spot cool occupied spaces

We can engineer cooling systems for the places most occupied by people, even devise small cooling stations in contained areas. In this way, the workers can get relief with some conditioned air in certain areas.

We have designed spot cooling for individual workstations to provide comfort in hot industrial workplaces. And in extreme spaces where workers are exposed to very high temperatures, such as in a foundry or engine plant, we have created “cooling rooms” to give workers some relief.

4. Relocate or raise heat-producing equipment

We can raise the industrial equipment off the floor to keep heat from collecting there and creating hot zones. And if we can place equipment on the perimeter, we can more easily exhaust heat to the exterior using fans and exhaust vents.

5. Keep it dry

If we can avoid bringing moisture into the space, it will be more comfortable. We can dehumidify specific high-occupancy areas if need be. In the past, we have suggested cooling methods such as indirect evaporative cooling systems for spot cooling factories without increasing the humidity.

6. Shade the windows and use LED lighting

We can make sure occupied spaces are shaded from direct sunlight and mitigate the building’s solar gain. Also, using lower-temperature LED lighting throughout rather than incandescent lights helps reduce heat.

For example, at Sacramento Municipal District’s East Campus Operations Center in California, we used special window shades and louvers. They project daylight into the workspaces while keeping the sun’s heat out. We can use similar approaches in manufacturing plants.

7. Increase insulation and airtightness

The steel construction and limited insulation on the roof and walls subject industrial structures in warmer regions to solar heat gains. What’s worse is that we see this heat gain turns the physical elements of the building into unexpected radiators. Our analysis of these factories shows fire hydrants, columns, and steel elements in the interior becoming hot spots on the interior of the facility.

Graphic of a sample ventilation scheme for an industrial factory.
This sample factory ventilation scheme shows multiple options for enhancing thermal comfort. These include supplementing existing background ventilation with a dedicated exhaust system close to main heat gain sources, providing minimum cooled makeup air directed to all areas, and treating and cooling mechanical makeup air supply. Photo courtesy Stantec

In most areas, when we add cooling to any existing factory that triggers compliance with the latest energy code. Therefore, installations to provide thermal comfort often require upgrades to the roof and walls with additional insulation to improve the R-value. To avoid losing the cooling effect from the newly retrofitted factory, we have recommended the installation of loading dock covers, new vestibules with rapid doors, and air curtains.

8. Use conditioned air or localized air conditioning

It may seem that we’re forced to choose human comfort over the environment when we choose to install AC in factories. But it might be necessary. In sunny areas, we can even power it with rooftop photovoltaics, mitigating carbon emissions.

Typically, when we design automotive plants for the big North American automakers, we provide “conditioned air.” It is 10 degrees cooler than outdoors. It’s not quite air conditioning, but it helps deliver a level of comfort.

We sometimes find ways to use AC strategically to cool the spaces people use. This can help in worker retention. Only a few years ago, we worked with a major auto manufacturer because their workers were finding their plant temperature conditions uncomfortable. They were quitting and going to other, cooler, facilities. Our new design provided air conditioning to specific maintenance areas to offer the workers relief, which improved retention.

The future of factories

There’s no magic trick to making factories more comfortable, But we can combine the points above in smart, low-emissions factory designs with an emphasis on well-being and an eye on budget.

There’s no reason the 21st-century manufacturing facility can’t be a healthy place to work.

More from Author

Stantec | Apr 18, 2024

The next destination: Passive design airports

Today, we can design airports that are climate resilient, durable, long-lasting, and healthy for occupants—we can design airports using Passive House standards.

Stantec | Mar 18, 2024

A modular construction solution to the mental healthcare crisis

Maria Ionescu, Senior Medical Planner, Stantec, shares a tested solution for the overburdened emergency department: Modular hub-and-spoke design.

Stantec | Nov 20, 2023

8 strategies for multifamily passive house design projects

Stantec's Brett Lambert, Principal of Architecture and Passive House Certified Consultant, uses the Northland Newton Development project to guide designers with eight tips for designing multifamily passive house projects.

Stantec | Apr 10, 2023

Implementing human-centric design in operations and maintenance facilities

Stantec's Ryan Odell suggests using the human experience to advance OMSF design that puts a focus on wellness and efficiency.

Stantec | Jul 6, 2022

5 approaches to a net zero strategy that communities can start right now

Whether your community has started on a plan or is still considering net zero, now is the time for all of us to start seriously addressing climate change.

Stantec | Feb 14, 2022

5 steps to remake suburbs into green communities where people want to live, work, and play

Stantec's John Bachmann offers proven tactic for retrofitting communities for success in the post-COVID era.

Stantec | Feb 8, 2022

How gaming technology is changing the way we design for acoustics

Adding 3D sound from gaming engines to VR allows designers to represent accurate acoustic conditions to clients during design.

Stantec | Dec 15, 2021

EV is the bridge to transit’s AV revolution—and now is the time to start building it

Thinking holistically about a technology-enabled customer experience will make transit a mode of choice for more people.

Stantec | Sep 3, 2021

Passports to a net-zero carbon future

How materials passports can help designers achieve social value and net-zero carbon.

Stantec | Aug 25, 2021

The mall of the future: Less retail, more content

For the mall to survive, it will need to embrace nontraditional uses and “messy vitality.” Here’s how to do it.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021