When it comes to kitchen and bath design trends for both single-family and multifamily residences, contemporary is in, with clean, minimal lines and little ornamentation.
Universal design amenities and easy-maintenance features are also trending, according to a recent survey of more than 420 kitchen and bath design professionals by the National Kitchen and Bath Association (NKBA).
This year, consumers want kitchens that have “simple lines and not as much frou-frou, and are more about good storage and space planning,” summed up one NKBA designer.
Consumers want bathrooms to be “spaces to retreat and relax,” commented one member, “with luxurious details whenever possible.” Another sees “a general move toward simplicity in style, minimal color, but maximizing the features and storage.”
They are also demanding more universal design features. Fifty-seven percent of NKBA designers specified accessible or universal design features in bathrooms in 2013, and 56% incorporated them into kitchens. A majority of respondents anticipate adding more of these features, such as shower benches, comfort-height toilets, and vanities in baths; and microwave drawers and touch-activated or touch-less kitchen faucets in 2014.
The demand for easy maintenance spaces and products is also growing.
Bathroom design trends
1. Beige, bone and gray are hot and getting hotter
2. Universal design is becoming more universal
3. Soaking tubs are in the spotlight
4. Shower seating is here to stay
5. Radiant floors may be heating up
6. Steam showers are gaining steam
7. No holding back on no-threshold showers
8. Comfort is key when it comes to toilets and vanities
Kitchen Design Trends
9. Granite is on top, but quartz is catching up
Some 70% of respondents see quartz countertops increasing in 2014. At the end of 2013, granite and quartz were almost tied for the top spot in countertop materials, at 91% and 90% respectively.
10. Stainless is timeless
11. Pullout faucets still pulling ahead
12. Microwave drawers beating out warming drawers
13. Gray and white are hand-in-hand
14. LEDs outshine incandescents
15. Cherry tops the wood types in cabinets
16. Flooring stays steady with wood, ceramic/porcelain
Related Stories
75 Top Building Products | Apr 22, 2024
Enter today! BD+C's 75 Top Building Products for 2024
BD+C editors are now accepting submissions for the annual 75 Top Building Products awards. The winners will be featured in the November/December 2024 issue of Building Design+Construction.
Laboratories | Apr 22, 2024
Why lab designers should aim to ‘speak the language’ of scientists
Learning more about the scientific work being done in the lab gives designers of those spaces an edge, according to Adrian Walters, AIA, LEED AP BD+C, Principal and Director of SMMA's Science & Technology team.
Resiliency | Apr 22, 2024
Controversy erupts in Florida over how homes are being rebuilt after Hurricane Ian
The Federal Emergency Management Agency recently sent a letter to officials in Lee County, Florida alleging that hundreds of homes were rebuilt in violation of the agency’s rules following Hurricane Ian. The letter provoked a sharp backlash as homeowners struggle to rebuild following the devastating 2022 storm that destroyed a large swath of the county.
Mass Timber | Apr 22, 2024
British Columbia changing building code to allow mass timber structures of up to 18 stories
The Canadian Province of British Columbia is updating its building code to expand the use of mass timber in building construction. The code will allow for encapsulated mass-timber construction (EMTC) buildings as tall as 18 stories for residential and office buildings, an increase from the previous 12-story limit.
Standards | Apr 22, 2024
Design guide offers details on rain loads and ponding on roofs
The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.
Building Materials | Apr 22, 2024
Tacoma, Wash., investigating policy to reuse and recycle building materials
Tacoma, Wash., recently initiated a study to find ways to increase building material reuse through deconstruction and salvage. The city council unanimously voted to direct the city manager to investigate deconstruction options and estimate costs.
Student Housing | Apr 19, 2024
$115 million Cal State Long Beach student housing project will add 424 beds
A new $115 million project recently broke ground at California State University, Long Beach (CSULB) that will add housing for 424 students at below-market rates. The 108,000 sf La Playa Residence Hall, funded by the State of California’s Higher Education Student Housing Grant Program, will consist of three five-story structures connected by bridges.
Construction Costs | Apr 18, 2024
New download: BD+C's April 2024 Market Intelligence Report
Building Design+Construction's monthly Market Intelligence Report offers a snapshot of the health of the U.S. building construction industry, including the commercial, multifamily, institutional, and industrial building sectors. This report tracks the latest metrics related to construction spending, demand for design services, contractor backlogs, and material price trends.
MFPRO+ New Projects | Apr 16, 2024
Marvel-designed Gowanus Green will offer 955 affordable rental units in Brooklyn
The community consists of approximately 955 units of 100% affordable housing, 28,000 sf of neighborhood service retail and community space, a site for a new public school, and a new 1.5-acre public park.
Construction Costs | Apr 16, 2024
How the new prevailing wage calculation will impact construction labor costs
Looking ahead to 2024 and beyond, two pivotal changes in federal construction labor dynamics are likely to exacerbate increasing construction labor costs, according to Gordian's Samuel Giffin.
