flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

USGBC to GAO: 'Schools need over $271 billion in maintenance fixes'

USGBC to GAO: 'Schools need over $271 billion in maintenance fixes'

Report calls for new federal study, better reporting of school maintenance needs.


By BD+C Staff | March 18, 2013
Courtesy ThroughYourLens.org
Courtesy ThroughYourLens.org

 

The Center for Green Schools at the U.S. Green Building Council (USGBC) has released its first “State of our Schools” report, highlighting the critical need to modernize school facilities to meet current health, safety and educational standards. 
 
The report, featuring a foreword by former President Bill Clinton, states that schools are currently facing a $271 billion deferred maintenance bill just to bring the buildings up to working order – approximately $5,450 per student. 
 
The last comprehensive report on America’s school facilities was conducted by the Government Accountability Office (GAO) in 1995 and indicated that 15,000 U.S. schools were circulating air that at the time was deemed unfit to breathe. The USGBC report calls on the GAO to conduct an updated survey on the condition of America's schools in order to paint a more complete picture of the scale and scope of today’s needs. The USGBC report also estimates that the cost to both bring schools into good repair and address modernization needs is $542 billion over the next 10 years for Pre-K-12 school buildings.
 
"The places where our children learn matter. This report is a critical first step to taking action and creating healthy, sustainable school buildings," said Rick Fedrizzi, president, CEO and founding chair, USGBC. "Schools are the backbone of our communities, and it is unacceptable that we would allow any of our children to show up in classrooms that compromise their ability to learn. We must do more."
 
"Approximately 50 million students attend the nearly 100,000 public elementary and secondary schools in the United States. Many of these schools barely meet today's standards, yet it’s been an astonishing 18 years since the last comprehensive study on school conditions was conducted," said Rachel Gutter, director, Center for Green Schools at USGBC. "We are confident Congress will take up the charge to commission a new report on the state of educational facilities across the country. We can’t continue to ignore a problem just because we don’t understand the extent of it."
 
The Center for Green Schools at USGBC is urging the GAO to commission another survey on the condition of America’s schools, with support from 24 organizations, including the 21st Century School Fund, the American Federation of Teachers, the American Lung Association, the National Education Association (NEA) and the National PTA, among others. 
 
"Our job—as educators, as parents and as elected officials—is to remove barriers so that all students can succeed," said NEA President Dennis Van Roekel. "This means investing in the right priorities. Children need and deserve safe and healthy environments so they can learn. It’s not more complicated than that.”
 
Key recommendations from the report include: 
 
• Expand the Common Core of Data (a set of academic expectations collected annually by 
the National Center for Education Statistics that define the knowledge and skills all 
students should master by the end of each grade level) to include school level data on 
building age, building size and site size.
 
• Improve the current fiscal reporting of school district facility maintenance and operations 
data to the National Center for Education Statistics so that utility and maintenance 
expenditures are collected separately.
 
• Improve the collection of capital outlay data from school districts to include identification 
of the source of capital outlay funding and distinctions between capital outlay categories 
for new construction and for existing facilities. 
 
• Provide financial and technical assistance to states from the U.S. Department of 
Education to incorporate facility data in their state longitudinal education data systems. 
 
• Mandate a GAO facility condition survey take place every 10 years, with the next one 
beginning immediately.
 
Please visit centerforgreenschools.org/stateofschools to download the full report.
 
 
About the Center for Green Schools at USGBC
The Center for Green Schools at the U.S. Green Building Council is making sure every student 
has the opportunity to attend a green school within this generation. From kindergarten to 
college and beyond, the Center works directly with staff, teachers, faculty, students, 
ambassadors, elected officials and communities to drive the transformation of all schools into 
sustainable places to live and learn, work and play. For more information, visit http://centerforgreenschools.org
 
The U.S. Green Building Council (USGBC) is committed to a prosperous and sustainable future 
through cost-efficient and energy-saving green buildings. USGBC works toward its mission of 
market transformation through its LEED green building certification program, robust educational 
offerings, a nationwide network of chapters and affiliates, the annual Greenbuild International 
Conference & Expo and advocacy in support of public policy that encourages and enables 
green buildings and communities. For more information, visit usgbc.org.

Related Stories

MFPRO+ News | Jan 2, 2024

New York City will slash regulations on housing projects

New York City Mayor Eric Adams is expected to cut red tape to make it easier and less costly to build housing projects in the city. Adams would exempt projects with fewer than 175 units in low-density residential areas and those with fewer than 250 units in commercial, manufacturing, and medium- and high-density residential areas from environmental review. 

Urban Planning | Jan 2, 2024

Federal Highway Administration releases updated traffic control manual

With pedestrian deaths surging nationwide, the Federal Highway Administration released a new edition of the Manual on Uniform Traffic Control Devices for Streets and Highways. The manual contains standards for street markings and design, standardizing signage, and making driving as seamless as possible. 

Engineers | Dec 22, 2023

ACEC report identifies opportunities for improving diversity for engineering firms

The ACEC Research Institute recently released a Diversity Roadmap presenting the state of diversity, equity, inclusion, and belonging (DEI&B) in the engineering industry.

Contractors | Dec 22, 2023

DBIA releases two free DEI resources for AEC firms

The Design-Build Institute of America (DBIA) has released two new resources offering guidance and provisions on diversity, equity, and inclusion (DEI) on design-build projects.

MFPRO+ News | Dec 22, 2023

Document offers guidance on heat pump deployment for multifamily housing

ICAST (International Center for Appropriate and Sustainable Technology) has released a resource guide to help multifamily owners and managers, policymakers, utilities, energy efficiency program implementers, and others advance the deployment of VHE heat pump HVAC and water heaters in multifamily housing.

Sustainability | Dec 22, 2023

WSP unveils scenario-planning online game

WSP has released a scenario-planning online game to help organizations achieve sustainable development goals while expanding awareness about climate change.

MFPRO+ News | Dec 18, 2023

Berkeley, Calif., raises building height limits in downtown area

Facing a severe housing shortage, the City of Berkeley, Calif., increased the height limits on residential buildings to 12 stories in the area close to the University of California campus.

Green | Dec 18, 2023

Class B commercial properties gain more from LEED certification than Class A buildings

Class B office properties that are LEED certified command a greater relative benefit than LEED-certified Class A buildings, according to analysis from CBRE. The Class B LEED rent advantage over non-LEED is about three times larger than the premium earned by Class A LEED buildings.

Codes and Standards | Dec 18, 2023

ASHRAE releases guide on grid interactivity in the decarbonization process

A guide focusing on the critical role of grid interactivity in building decarbonization was recently published by ASHRAE. The Grid-Interactive Buildings for Decarbonization: Design and Operation Resource Guide provides information on maximizing carbon reduction through buildings’ interaction with the electric power grid.

Architects | Dec 18, 2023

Perkins&Will’s new PRECEDE tool provides access to public health data to inform design decisions

Perkins&Will recently launched a free digital resource that allows architects and designers to access key public health data to inform design decisions. The “Public Repository to Engage Community and Enhance Design Equity,” or PRECEDE, centralizes demographic, environmental, and health data from across the U.S. into a geospatial database.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021