flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

South Dakota prefers LEED over building code on state projects

South Dakota prefers LEED over building code on state projects

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.


November 16, 2012

Four years ago, South Dakota passed a bill requiring all new government buildings and major renovations to be LEED-certified, with some exceptions. The state engineer’s office has waived the requirement for 32 projects where the costs of certification would have been prohibitive, or because the renovations would encompass less than half the building, or for other reasons.

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration. “The state recognizes that we can’t pick a standard and then pursue it at any and all cost.”

Click here to read more. +

Related Stories

| Apr 10, 2013

New skyscraper designs raising the bar on green standards

Though most new skyscraper designs have a traditional look, they are including a wider array of sustainable elements to use energy and water more efficiently and improve human health.

| Apr 5, 2013

Lack of national standards on design of bioterror labs creates higher risk for accidents, panel says

U.S. labs that conduct research on bioterror germs such as anthrax are at risk for accidents because they do not have uniform design and operation standards, according to a Congressional investigative group.

| Apr 5, 2013

Builders Hardware Manuf. Assn. revises three standards for hinges, locks, and latches

The Builders Hardware Manufacturers Association (BHMA) released three new revisions to the ANSI/BHMA standardsfor hinges, interconnected locks, and sliding and folding hardware.

| Apr 5, 2013

New items to ASHRAE/IES energy standard open for public comment

The 2013 version of the ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, is scheduled for publication later this year, and 26 proposed addenda are open for public comment.

| Apr 5, 2013

No evidence that mandatory building energy labeling improves efficiency, study says

The Building Owners and Managers Association (BOMA) International and the Greater Boston Real Estate Board (GBREB) released a report, “An Economic Perspective on Building Labeling Policies,” that questions the efficacy of mandatory building energy labeling.

| Mar 27, 2013

Practical application of Legionella prevention standards the focus of ASHRAE project

An American Society of Heating, Refrigerating and Air-Conditioning Engineers committee drafting tough new standards to prevent the waterborne bacteria Legionella is focused on how to apply the standards in the real world.

| Mar 27, 2013

Open discussion of regulations on tap at AGC’s 2013 Federal Contractors Conference

The AGC Federal Contractors Conference provides a venue for contractors and federal agency personnel to meet in a collaborative forum to review federal construction contracting issues from around the United States.

| Mar 27, 2013

New BACnet standard offers significant improvements to alarm handling

Changes to the newly published BACnet standard from ASHRAE will encourage smart building automation controls systems including alarms.

| Mar 27, 2013

CEIR releases tool that measures energy, environmental benefits of roof systems

The Center for Environmental Innovation in Roofing (CEIR) released its new RoofPoint Energy and Carbon Calculator that is designed to help roofing professionals measure the energy and environmental benefits of modern roof system technologies.

| Mar 27, 2013

Sustainable wood controversy leads to LEED ‘backlash bill’ in Florida House

A Florida House bill that says state agencies should decide on a project-by-project basis which green certification standards are used on state construction passed a subcommittee vote 12-1.

boombox1 - default
boombox2 -
native1 -

More In Category

Contractors

AGC releases decarbonization playbook to help assess, track, reduce GHG emissions

The Associated General Contractors of America released a new, first-of-its-kind, decarbonization playbook designed to help firms assess, track, and reduce greenhouse gas emissions on projects. The AGC Playbook on Decarbonization and Carbon Reporting in the Construction Industry is part of the association’s efforts to make sure construction firms play a leading role in crafting carbon-reduction measures for the industry.




Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021