flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

RMJM acquired by Duthus Investments for £12 million

RMJM acquired by Duthus Investments for £12 million

Current owner/chairman Sir Fraser Morrison is reportedly the primary backer for the transaction.


By building.co.uk | April 16, 2013

 

 

Sir Fraser Morrison, the owner and chairman of architect RMJM, is the backer behind the investment firm that bought RMJM for £11m in late March.

Declan Thompson, RMJM’s group commercial director, said the deal, which involved Duthus Investments buying RMJM Architecture Limited for £11m, would wipe £12m of debt off the RMJM books and allow the firm to reinvest.

According to Companies House, Duthus Investments was incorporated on the 5 March.

Sir Fraser Morrison is a construction tycoon and one of Scotland’s wealthiest individuals and Thompson said the investment firm was part of his “family of investment companies”.

Morrison bought a 56% share in RMJM in 2002 and installed his son Peter Morrison as chief executive in 2006. At the time of the sale to Duthus Investments earlier this week Morrison owned 75% of the voting rights.

Thompson said the sale was a “simple thing to allow Sir Fraser Morrison to write off £12m” and was part of the board’s “strategy to get rid of debt off the books”.

He added that the deal left the firm with debts totalling around £11m and that the firm was “quite optimistic” about the future.

Thompson said the firm’s cash flow problems, which have seen staff receive salaries late and pension payments delayed, were now behind it following the sale.

“RMJM has spent much of 2011-12 doing difficult things and making difficult choices to get the business stable,” he said.

He said the loss of a number of senior staff over the last year had been wrongly reported by the media.  “In quite a lot of instances those people have been asked to leave the business because they weren’t performing,” he said.

He added there were no more plans for further cuts to staff numbers and the firm would be hiring new staff where necessary. “We have got to the point where we have enough, or just enough, very busy architects,” he said.

Thompson said he had no plans to add to the senior team, which includes recently-appointed principal Jonathan French, who joined from David Chipperfield Architects earlier this year.

Thompson said he expected to see recovery in the Chinese and Middle East markets to return some growth to the firm. “The UK market is going to stay quite difficult,” he added.

http://www.building.co.uk/buildings/architecture/morrison-emerges-as-backer-behind-rmjm-buyer/5052760.article

Related Stories

Codes and Standards | May 10, 2024

California law that ended single-family zoning is struck down by court

A law ending single-family-home-only zoning in California was ruled unconstitutional by a Los Angeles County Superior Court judge. The decision could lead to the law being invalidated in the state’s largest cities. 

Sustainability | May 10, 2024

Perkins&Will’s first ESG report discloses operational performance data across key metrics

Perkins&Will recently released its first ESG report that discloses the firm’s operational performance data across key metrics and assesses its strengths and opportunities.

Codes and Standards | May 10, 2024

Guide on electrifying space heating for large commercial buildings with boilers released

The U.S. Department of Energy has released a guide on electrifying space heating for large commercial buildings with boilers. The guide summarizes key considerations for people seeking to retrofit existing large commercial and multifamily buildings, particularly those that currently heat spaces using fossil fuel-fired boilers.

MFPRO+ News | May 10, 2024

HUD strengthens flood protection rules for new and rebuilt residential buildings

The U.S. Department of Housing and Urban Development (HUD) issued more stringent flood protection requirements for new and rebuilt homes that are developed with, or financed with, federal funds. The rule strengthens standards by increasing elevations and flood-proofing requirements of new properties in areas at risk of flooding. 

Government Buildings | May 10, 2024

New federal buildings must be all-electric by 2030

A new Biden Administration rule bans the use of fossil fuels in new federal buildings beginning in 2030. The announcement came despite longstanding opposition to the rule by the natural gas industry. 

Codes and Standards | May 10, 2024

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

The Fenestration and Glazing Industry Alliance (FGIA) updated a specification establishing requirements for field testing newly installed storefronts, curtain walls, and sloped glazing systems.

Codes and Standards | May 3, 2024

New York City considering bill to prevent building collapses

The New York City Council is considering a proposed law with the goal of preventing building collapses. The Billingsley Structural Integrity Act is a response to the collapse of 1915 Billingsley Terrace in the Bronx last December. 

AEC Tech | Apr 30, 2024

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 

Codes and Standards | Apr 30, 2024

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 

MFPRO+ News | Apr 29, 2024

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021