flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Nu-Wood brackets give 110-year-old hotel another level of distinction

Products and Materials

Nu-Wood brackets give 110-year-old hotel another level of distinction

One of the goals during the hotel’s 2014 and 2015 refurbishment was to create a low maintenance exterior. 


By David Malone, Associate Editor | July 24, 2017
Hotel Breakers with the recently added Nu-Wood brackets

Photo: Courtesy of Nu-Wood

During a recent restoration, Hotel Breakers, a 110-year-old hotel located adjacent to Ohio’s Cedar Point amusement park, was outfitted with almost 500 Nu-Wood brackets.

One of the goals during the hotel’s 2014 and 2015 refurbishment was to create a low maintenance exterior. Because so many brackets were required, and due to the high elevation at which many would be installed, future maintenance would be costly and difficult. Braun & Steidl Architects, the architect for the project, specified the use of custom-made brackets in three sizes from Nu-Wood.

 

Close up view of the Nu-Wood brackets used in the Hotel Breakers restorationPhoto: Courtesy of Nu-Wood.

 

The Nu-Wood polyurethane brackets will not rot, crack, absorb water, or swell and are moisture-, mold-, insect-, and impact-resistant, all while retaining the desired aesthetic of real wood. The brackets were made in a range of sizes from three feet tall up to more than five feet tall in order to be clearly visible from the ground.

225 brackets were installed along the roofline in phase one of the renovation and an additional 205 brackets were installed in phase two. 65 brackets will be installed to a new addition planned for the hotel later this year. 

Related Stories

| Aug 11, 2010

Walmart establishes sustainable product index to evaluate 'greeness' of products

Walmart today announced plans to develop a worldwide sustainable product index during a meeting with 1,500 of its suppliers, associates and sustainability leaders at its home office. The index will establish a single source of data for evaluating the sustainability of products.

| Aug 11, 2010

Best AEC Firms of 2011/12

Later this year, we will launch Best AEC Firms 2012. We’re looking for firms that create truly positive workplaces for their AEC professionals and support staff. Keep an eye on this page for entry information. +

| Aug 11, 2010

Manitoba Hydro Place, Tornado Tower among world's 'best tall buildings,' according to the Council on Tall Buildings and Urban Habitat

The Council on Tall Buildings and Urban Habitat last week announced the winners of its annual “Best Tall Building” awards for 2009, recognizing one outstanding tall building from each of four geographical regions: Americas, Asia & Australia, Europe, and Middle East & Africa. This year’s winners are: Manitoba Hydro Place, Winnipeg, Canada; Linked Hybrid, Beijing, China; The Broadgate Tower, London, UK; Tornado Tower, Doha, Qatar.

| Aug 11, 2010

Clark Group, Mortenson among nation's busiest state/local government contractors, according to BD+C's Giants 300 report

A ranking of the Top 40 State/Local Government Contractors based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit /giants

| Aug 11, 2010

Marks 175 Bio biometric fingerprint reader with leverset

The New 175 BIO is a Hi-Tech fingerprint recognition system that eliminates the risk of replication or unauthorized use.

| Aug 11, 2010

Vytec Yukon Board premium insulated siding offers new design, accessories

Yukon Board Premium Insulated Siding from CertainTeed Corporation’s Vytec brand of vinyl siding products, welcomes a new updated design.

| Aug 11, 2010

Metl-span panels add strength to fitness center

The new Centegra Health Bridge Fitness Center is located on the 40-acre Centegra Health Campus in Huntley, IL. The 120,000 sq. ft. facility presents a high-tech exterior look that features a “running bond” panel pattern plus random placement of two different silver colors of Metl-Span panels. The running bond pattern creates a distinctive appearance by staggering the vertical joints between panels.

| Aug 11, 2010

AAMA leads development of BIM standard for fenestration products

The American Architectural Manufacturers Association’s newly formed BIM Task Group met during the AAMA National Fall Conference to discuss the need for an BIM standard for nonresidential fenestration products.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021