flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

July 2012: Product Solutions

July 2012: Product Solutions

Insulation, ceiling panels, sunshades.


By By Nicole Bowling, Associate Editor | July 13, 2012
This article first appeared in the July 2012 issue of BD+C.

Architectural-grade insulation is energy-efficient, moisture resistant

ACH Foam Technologies’ new EPS architectural-grade insulation, Foam-Control Plus+, can be used in a wide range of applications, such as perimeter insulation, under-slab insulation, cavity wall insulation, sheathing, precast concrete applications, green roofs, plaza decks, and waterproofing applications—especially where its moisture-resistant properties can be a benefit. ACH Foam provides Foam-Control Plus+ in 2x8-foot and 4x8-foot sheets up to 36 inches thick.

ACH Foam Technologies

 

[pagebreak]

Ceiling panels increase fire rating

Class-A fire-rated panels from WoodTrac are available in three finishes: Abbey Oak, Bank Alder, and White/Paintable. Panels can be installed in any 2x2-foot or 2x4-foot suspended ceiling. The manufacturer has provided three profiles of moldings: Tear Drop, Colonial, and Cove. Moldings can be installed over any 15/16-inch or one-inch-wide ceiling grid. Panels can be combined with any molding profile and molding finish to match the desired look. Class-A panels are made of 3/8-inch-thick fire-rated board laminated on both sides with high-definition micropaper.

WOODTRAC

 

[pagebreak]

Sunshades reduce solar heat, improve energy performance

Architectural sunshades from Gamco include pre-engineered louver blades, outrigger supports, and mounting brackets. The sunshade blades are offered in several standard and custom shapes, including tubular profiles. Fabricated from lightweight aluminum, the sunshade blades are available in anodized or a wide variety of painted finishes. Outriggers are available in standard depths of 24 and 30 inches, as well as custom sizes, in either stainless or painted steel to assure strength and durability. Gamco’s adaptable mounting bracket systems are used to securely anchor the sunshade outriggers to the building façade.

GAMCO Corp.

Related Stories

| May 20, 2014

Using fire-rated glass in exterior applications

Fire-rated glazing and framing assemblies are just as beneficial on building exteriors as they are on the inside. But knowing how to select the correct fire-rated glass for exterior applications can be confusing. SPONSORED CONTENT

| May 15, 2014

Paints, coatings, and sealants: 10 new ways to seal the deal

Color-shifting finishes, dry-erase surfaces, and stain-blocking paints are highlighted in this round up of new offerings in paints, coatings, sealants, and finishes. 

| May 14, 2014

Prefab payback: Mortenson quantifies cost and schedule savings from prefabrication techniques

Value-based cost-benefit analysis of prefab approaches on the firm's 360-bed Exempla Saint Joseph Heritage Project shows significant savings for the Building Team. 

| May 13, 2014

19 industry groups team to promote resilient planning and building materials

The industry associations, with more than 700,000 members generating almost $1 trillion in GDP, have issued a joint statement on resilience, pushing design and building solutions for disaster mitigation.

| May 2, 2014

Norwegian modular project set to be world's tallest timber-frame apartment building [slideshow]

A 14-story luxury apartment block in central Bergen, Norway, will be the world's tallest timber-framed multifamily project, at 49 meters (160 feet). 

| May 1, 2014

Tight on space for multifamily? Check out this modular kitchen tower

The Clei Ecooking kitchen, recently rolled out at Milan's Salone de Mobile furniture fair, squeezes multiple appliances into a tiny footprint.

| Apr 25, 2014

Recent NFPA 80 updates clarify fire rated applications

Code confusion has led to misapplications of fire rated glass and framing, which can have dangerous and/or expensive results. Two recent NFPA 80 revisions help clarify the confusion. SPONSORED CONTENT

| Apr 9, 2014

Steel decks: 11 tips for their proper use | BD+C

Building Teams have been using steel decks with proven success for 75 years. Building Design+Construction consulted with technical experts from the Steel Deck Institute and the deck manufacturing industry for their advice on how best to use steel decking.

| Apr 8, 2014

Fire resistive curtain wall helps The Kensington meet property line requirements

The majority of fire rated glazing applications occur inside a building to allow occupants to exit the building safely or provide an area of refuge during a fire. But what happens when the threat of fire comes from the outside? This was the case for The Kensington, a mixed-use residential building in Boston.

| Apr 8, 2014

Reflecting on job number 61-001

Job number 61-001 changed everything. It was sold in 1961, a year of change for the nation and for Star. By January, John F. Kennedy would be president. By the end of the year, Star would launch a historic shift in our product and our distribution, a shift still active today.

boombox1 - default
boombox2 -
native1 -

More In Category




Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021