flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

A few bright spots for AEC firms in 2010

A few bright spots for AEC firms in 2010


August 11, 2010
This article first appeared in the 201001 issue of BD+C.

The AEC industry is heading into 2010 in better shape than was the case a year ago, according to the 2010 AEC Industry Outlook: Strategy and Insight for Design & Construction Firms, a new forecast released by ZweigWhite this month.

A significant turnaround for the commercial market isn't anticipated until 2011, but a modest pickup is expected in late 2010. Some sectors are faring better than others—and will continue to do so. Markets to watch for 2010: healthcare, education, and mixed-use.

Following is an overview of the major commercial AEC markets, based on the ZweigWhite report.

Three sectors showing growth

Healthcare. This sector's growth over the past few years is expected to continue for 2010 and beyond. Although some slowing is expected, healthcare is still considered the hottest market for AEC firms. Behind the market's growth: rising numbers of outpatient procedures, aging population, declining hospital infrastructure, consolidation of healthcare systems, BIM and other technologies, sustainable design, and security and disaster preparedness.

The value of healthcare construction to be put in place for 2010 will reach $48.5 billion, an increase of 1.2% from 2009 levels.

Education. Education is one of the largest sectors for AEC firms, and it's growing, making K-12 and higher education markets two of the industry's best prospects. The markets aren't expected to slow significantly, but they took big hits in 2008 and 2009 and are not immune to the downturn.

For 2010, the education sector outlook is mixed, with high school construction looking strong and college and university construction to continue apace to meet projected enrollment increases through 2017. Project work is also expected to be mixed—some new construction and some expansions and renovations to existing facilities.

Overall, the value of all school construction to be put in place for 2010 will top $99.5 billion.

Mixed-use. Another bright spot in the industry. Mixed-use projects are gaining in popularity because the building type ties into New Urbanist principals, creates more livable communities, and is being used as a catalyst for city redevelopment.

Construction spending on mixed-use projects is not tracked, so predictions for 2010 are unavailable. Mixed-use projects, however, aren't immune to a slow economy because many incorporate components from markets that are down, such as lodging and retail.

The rest of the story

Lodging. One of the hardest-hit commercial sectors, lodging is expected to continue its sluggish pace in 2010. The decline, however, is viewed as cyclical, and a recovery is anticipated for 2011.

The value of lodging construction to be put in place for 2010 will reach $20.1 billion, a decrease of 12.8% from 2009 levels.

Manufacturing. Construction of manufacturing and industrial facilities also slowed significantly because of the recession, and 2010 is expected to be another down year. Rents are expected to decline through 2010. Market recovery isn't expected until 2011, and then is expected to be slow.

The value of manufacturing construction to be put in place for 2010 will reach $59.6 billion, a decrease of 19% from 2009 levels.

Multifamily. This sector was hit hard by the recession, and a slow 2010 is expected, with some growth anticipated in 2011. Multifamily starts are notoriously volatile, but they are expected to reach 126,000 for 2010, down from 130,000 in 2009. Looking ahead to 2011, multifamily starts are expected to average 150,000.

Office buildings. With so many layoffs, the nation's reduced workforce is the biggest drag on the office sector. An improving economy signals a turnaround—although the rebound will happen slowly and cautiously. Vacancy rates are expected to remain high during 2010 and then start to decrease in 2011.

The value of office construction to be put in place for 2010 will reach $46.6 billion, a decrease of 13.5% from 2009 levels.

The ZweigWhite 2010 AEC Industry Outlook (214-page PDF, $295; free Executive Summary) may be ordered at: http://www.zweigwhite.com/p-858-2010-aec-industry-outlook-strategy-and-insight-for-design-construction-firms.php?mtn=F3658E

Related Stories

Products and Materials | Apr 10, 2017

Composite siding revivifies Ohio luxury community

Following severe hailstorm damage, this Sandusky, Ohio, community replaces its high-maintenance cedar siding with a composite solution.

Great Solutions | Apr 6, 2017

Phone booths for the 21st century

Spotting a phone booth on a public street may not become any less rare, but they may soon become fixtures in the modern office.

Products and Materials | Mar 28, 2017

Mondopads highlight Portland State University’s new Decision Theater

A total of seven InFocus Mondopads were used in the room to accommodate large group work and individual study.

Products and Materials | Mar 21, 2017

Product roundup: 12 glazing and daylighting systems

SunGuard CrystalBlue from Guardian Industries, 8300 Series from Wausau Window and Wall, and YES 60 from YKK AP are just three of the 12 products highlighted in BD+C's April Product Roundup.

Products and Materials | Mar 16, 2017

Product roundup: 12 metal roofing and wall products

Tapered Series panels from Dri-Design, Retro-R Panels from MBCI, and Formawall from Centria are just three of the 12 products highlighted in BD+C's February Product Roundup.

Products and Materials | Feb 10, 2017

Washbar tech: A touchless triple threat

New technology from Bradley Corp. is doing all it can to improve the public restroom experience.

Products and Materials | Feb 7, 2017

Brick system offers lightweight alternative to conventional veneer

NewBrick is a lightweight insulated brick product that is coated with a specially formulated finish to mimic the look and feel of traditional brick.

Products and Materials | Jan 19, 2017

Handheld weather device could help keep construction crews safer

The INO Weather Pro combines lightning, temperature, atmospheric pressure, and humidity sensors into one device.

Products and Materials | Jan 13, 2017

Bluetooth tool and equipment tracker hopes to keep jobsite equipment from going missing

The Tick, from Milwaukee Tool, can attach to any piece of equipment via glue, screw, rivet, or strap.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021