flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

COVID-19 innovation: Setting parameters for hotel-to-hospital conversions

Coronavirus

COVID-19 innovation: Setting parameters for hotel-to-hospital conversions

tvsdesign breaks down different room types and how they might help free up hospital beds for coronavirus patients.


By John Caulfield, Senior Editor  | March 30, 2020
COVID-19 innovation: Setting parameters for hotel-to-hospital conversions

Infographic courtesy tvsdesign (see full verson below)

   

The American Hospital Association estimates that the U.S. has 924,000 hospital beds, or fewer than three beds for every 1,000 people. Less than 5% of those beds can be used for intensive-care patients. 

If, as Array Advisors predicts, most states will run out of available ICU beds by the middle of this month, repurposing hotels as temporary healthcare facilities becomes more viable, even necessary, by the day.

Tvsdesign, whose team is currently the design architect on the 1.2-million-sf Javits Center expansion in New York, has put together a checklist for when hotel-to-hospital conversion options make sense (see infographic below).

The firm also has analyzed three scenarios, based on patient needs and how they can be matched with available hotels.
• Scenario 1: Non-COVID-19 positive patients in recovery from surgeries/illnesses who don’t require life-support equipment. These patients could be relocated to appropriate facilities to free up hospital beds for meeting demands related to COVID-19.
• Scenario 2: Non-COVID-19 positive patients in recovery that require specialized and powered equipment.
• Scenario 3: COVID-19 positive patients in treatment.

The firm observes that some hotels will work better than others in supporting each scenario. Cleanable surfaces, mechanical and electrical systems, nurse-call devices, and handwash sinks are all factors that might need to be added to any hotel conversion.

Tvsdesign has identified hotel room types that can support these patient scenarios, ranging from 300 to 1,000 sf of space used per patient. For instance, a standard 300-sf King Suite room in a hotel might be a best-use case for Scenario 1; a 500-sf King Suite, with additional power, could support Scenarios 1 and 2.  The latter suite setup, with a full kitchen, would allow family members to stay full time with patients, and allow for the patient to have an extended recovery period. 

Option three would be a 600-sf standard King that could work for Scenario 3. A connecting room could be used as an ante room to maintain necessary pressure levels in the isolation room, and act as a nurse’s station. Before any conversion, the owner should consult with a mechanical engineer for adjustments to the room’s HVAC system. 

Option 4, a 1,000-sf King Suite with the same setup as Option 3, also works for Scenario 3.

“Based on our analysis, we believe that hotels can easily be used to care for COVID-19 negative patients who may be in recovery and not requiring intensive care,” states tvsdesign.  “The most practical and cost-effective approach is to divert patients from hospitals to hotel rooms as possible, increasing capacity within hospitals for the most critically ill patients.”

 

(CLICK INFOGRAPHIC TO ACCESS FULL-SIZE VERSION)

Related Stories

Coronavirus | Apr 23, 2020

It's time to make your back-to-the-office plan

Here are some practical, tactical considerations for reuniting.

Coronavirus | Apr 22, 2020

Architecture Billings Index points to major downturn in commercial construction

Largest monthly decline in billings a direct result of pandemic response.

Coronavirus | Apr 22, 2020

Construction activity in 2020 expected to drop steeply

[Dodge survey] Contractors girding for recession.

Coronavirus | Apr 21, 2020

COVID-19 update: CallisonRTKL, Patriot, PODS, and USACE collaborate on repurposed containers for ACFs

CallisonRTKL and PODS collaborate on repurposed containers for ACFs

Coronavirus | Apr 20, 2020

Virtual site visits help control infection on project sites

As COVID-19 threatens to slow construction work, point cloud technology helps us work safer and faster.

Coronavirus | Apr 19, 2020

IoT system helps contractors keep their distance on the jobsite

Triax Technologies’ wearable Proximity Trace device can be used for contact tracing.

Coronavirus | Apr 19, 2020

A COVID-19 task force focuses on crisis communications

The Castle Group is partnering with leading health experts to help companies factor science and medicine into their response messaging and actions.

Coronavirus | Apr 17, 2020

NMHC Multifamily Construction Survey shows significant delays in apartment construction

Survey asked construction firms how the spread of COVID-19 is affecting construction permitting, starts, completions, materials and labor.

Coronavirus | Apr 17, 2020

The case for public space in the age of COVID-19

As our daily footprint narrows under “stay at home” measures, we must reconsider our relationship with public spaces.

Coronavirus | Apr 16, 2020

COVID-19: Pennsylvania building products supplier raises $1.2 million for Pittsburgh-area food bank

Pennsylvania building products supplier raises $1.2 million for Pittsburgh-area food bank.

boombox1 - default
boombox2 -
native1 -

More In Category

MFPRO+ Special Reports

Top 10 trends in affordable housing

Among affordable housing developers today, there’s one commonality tying projects together: uncertainty. AEC firms share their latest insights and philosophies on the future of affordable housing in BD+C's 2023 Multifamily Annual Report.




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021