flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Construction material prices drop slightly in April, extending the decline

Construction material prices drop slightly in April, extending the decline


By Jim Haughey, BD+C Economist and Chief Economist with Reed Construction Data | August 11, 2010
This article first appeared in the 200906 issue of BD+C.

The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.

The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.

April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.

Percent Change in ..... 1 month 3 months 12 months 3 years
Source: Producer Price Index. Bureau of Labor Statistics
Construction commodities
Cement 0.8 -0.2 0.0 6.1
Construction sand, gravel & crushed stone 0.5 1.4 5.5 23.1
Softwood plywood -3.3 -4.9 -12.7 -21.1
Softwood lumber 1.6 -2.6 -10.7 -32.5
Manufactured materials
Gypsum products -0.2 -1.2 5.3 -17.5
Diesel fuel 20.5 -2.6 -56.2 -30.6
Paint 0.1 0.1 12.4 22.5
Plastic construction products -0.5 -0.6 3.0 1.9
Vitreous plumbing fixtures 2.3 2.4 4.2 -1.9
Ceramic tile -2.0 -1.4 -0.2 1.6
Flat glass -0.4 -1.0 2.9 2.7
Hot-rolled bars, plates, and structural shapes -7.3 -15.7 -25.9 -2.0
Extruded aluminum rod, bar, and other shapes 1.2 -4.3 -26.3 -18.2
Architectural metalwork 0.6 -2.4 12.1 24.7
Metal plumbing fixtures 0.5 0.2 2.2 13.1
Builders' hardware 0.5 -2.7 6.8 20.4
Sheet metal products -0.6 -3.6 0.2 9.9
Nonferrous pipe and tube 20.9 26.7 -28.5 -1.3
Building brick 0.5 -0.2 0.1 0.8
Ready-mix concrete -1.0 -1.9 3.4 10.7
Concrete block and brick 0.3 -0.1 3.3 10.1
Millwork (window, door, cabinet) -0.2 0.7 1.7 5.3
Engineered wood products -1.3 -3.3 -2.6 -14.6
Metal doors, sash, and trim -0.8 0.2 5.4 9.2
Summary
Construction materials (commodity level) -2.3 -3.1 -1.7 4.9
Inputs to construction industries -0.4 -1.6 -3.6 6.4
Inputs to nonresidential construction -0.3 -1.6 -5.2 6.3

Related Stories

| Aug 11, 2010

AASHE releases annual review of sustainability in higher education

The Association for the Advancement of Sustainability in Higher Education (AASHE) has announced the release of AASHE Digest 2008, which documents the continued rapid growth of campus sustainability in the U.S. and Canada. The 356-page report, available as a free download on the AASHE website, includes over 1,350 stories that appeared in the weekly AASHE Bulletin last year.

| Aug 11, 2010

AECOM, Arup, Gensler most active in commercial building design, according to BD+C's Giants 300 report

A ranking of the Top 100 Commercial Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

'Flexible' building designed to physically respond to the environment

The ecoFLEX project, designed by a team from Shepley Bulfinch, has won a prestigious 2009 Unbuilt Architecture Design Award from the Boston Society of Architects. EcoFLEX features heat-sensitive assemblies composed of a series of bi-material strips. The assemblies’ form modulate with the temperature to create varying levels of shading and wind shielding, flexing when heated to block sunlight and contracting when cooled to allow breezes to pass through the screen.

| Aug 11, 2010

New book provides energy efficiency guidance for hotels

Recommendations on achieving 30% energy savings over minimum code requirements are contained in the newly published Advanced Energy Design Guide for Highway Lodging.   The energy savings guidance for design of new hotels provides a first step toward achieving a net-zero-energy building.

| Aug 11, 2010

Pella Corporation ranks highest in customer satisfaction

Pella Corporation has earned the prestigious J.D. Power and Associates award for “Highest in Customer Satisfaction among Window and Patio Door Manufacturers” for the third year in a row.

| Aug 11, 2010

Perkins+Will master plans Vedanta University teaching hospital in India

Working together with the Anil Agarwal Foundation, Perkins+Will developed the master plan for the Medical Precinct of a new teaching hospital in a remote section of Puri, Orissa, India. The hospital is part of an ambitious plan to develop this rural area into a global center of education and healthcare that would be on par with Harvard, Stanford, and Oxford.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021