Construction material prices fell for the sixth consecutive month in December, losing 1.2% on a monthly basis and 4% on a yearly basis according to an analysis of the Bureau of Labor Statistics Producer Price Index released by Associated Builders and Contractors (ABC).
Construction input prices have fallen 7.2% since peaking in August 2014, and have fallen in 11 of the previous 16 months. Nonresidential construction input prices exhibited similar declines, falling 1.1% for the month and 4% for the year.
"Construction input prices continued to sink to the end of 2015, due in large measure to global deflationary forces that have become increasingly apparent," said ABC Chief Economist Anirban Basu. "The World Bank predicts that the global economy will expand by less than 3% in 2016, very limited growth by historic standards. Last year, the global economy expanded by just 2.4%, with significant weakness recorded in much of the emerging world. Like last year, major emerging nations like Russia and Brazil are anticipated to be in recession.
"In addition, the U.S. dollar remains strong," Basu said. "With only a couple of exceptions, the U.S. is the only major nation to increase interest rates. If interest rates rise as anticipated, the dollar will strengthen further in 2016, placing additional downward pressure on input prices. Even significant geopolitical events involving oil producing nations has not been enough to stem the decline in oil or other commodity prices."
Only four key input prices expanded in December on a monthly basis:
- Natural gas prices expanded 5.2% month-over-month but are down 46.5% year-over-year.
- Prices for prepared asphalt and tar roofing and siding products rose 1% on a monthly basis but are down 2% on a yearly basis.
- Concrete product prices ticked 0.3% higher from November and are up 3% from the same time one year ago.
- Fabricated structural metal product prices inched 0.1% higher for the month but are 0.9% lower than at the same time one year ago.
Seven key input prices fell in December on a monthly basis:
- Crude petroleum prices plunged 16% month-over-month and are 43.3% lower year-over-year.
- Crude energy materials prices fell 5.7% for the month and are down 35.8% for the year.
- Softwood lumber prices shed 2.9% from November and are 6.8% lower than at the same time one year ago.
- Steel mill product prices dipped 2.7% for the month and 19.8% for the year.
- Prices for nonferrous wire and cable fell 2.7% on a monthly basis and are down 9.9% on a yearly basis.
- Iron and steel prices are down 2.2% for the month and 23.7% for the year.
- Prices for plumbing fixtures and fittings fell 0.5% month-over-month but expanded 1.3% year-over-year.
Related Stories
Multifamily Housing | May 10, 2017
May 2017 National Apartment Report
Median one-bedroom rent rose to $1,012 in April, the highest it has been since January.
Senior Living Design | May 9, 2017
Designing for a future of limited mobility
There is an accessibility challenge facing the U.S. An estimated 1 in 5 people will be aged 65 or older by 2040.
Industry Research | May 4, 2017
How your AEC firm can go from the shortlist to winning new business
Here are four key lessons to help you close more business.
Engineers | May 3, 2017
At first buoyed by Trump election, U.S. engineers now less optimistic about markets, new survey shows
The first quarter 2017 (Q1/17) of ACEC’s Engineering Business Index (EBI) dipped slightly (0.5 points) to 66.0.
Market Data | May 2, 2017
Nonresidential Spending loses steam after strong start to year
Spending in the segment totaled $708.6 billion on a seasonally adjusted, annualized basis.
Market Data | May 1, 2017
Nonresidential Fixed Investment surges despite sluggish economic in first quarter
Real gross domestic product (GDP) expanded 0.7 percent on a seasonally adjusted annualized rate during the first three months of the year.
Industry Research | Apr 28, 2017
A/E Industry lacks planning, but still spending large on hiring
The average 200-person A/E Firm is spending $200,000 on hiring, and not budgeting at all.
Market Data | Apr 19, 2017
Architecture Billings Index continues to strengthen
Balanced growth results in billings gains in all regions.
Market Data | Apr 13, 2017
2016’s top 10 states for commercial development
Three new states creep into the top 10 while first and second place remain unchanged.
Market Data | Apr 6, 2017
Architecture marketing: 5 tools to measure success
We’ve identified five architecture marketing tools that will help your firm evaluate if it’s on the track to more leads, higher growth, and broader brand visibility.