For years, MEP engineers have debated the untapped potential lying within the walls and ceilings of virtually every modern commercial building: fire protection piping. Building owners sink a hefty sum into fire sprinkler infrastructure. Why not tap into this water distribution network for other uses, like toilet flushing?
Until recently, code officials have told Building Teams “hands off,” for fear of jeopardizing the integrity of these critical systems. But they are slowly coming around.
Two recent innovations are indicative of the trend. The first, the Fluid-Driven Sprinkler Light, utilizes a water turbine micro-generator with high-illumination LED light engines to provide emergency lighting without the need for batteries or other power sources (pictured above). Developed by the Industrial Technology Research Institute, the technology can provide for safer access and egress during fires, when buildings are engulfed by smoke.
High temperatures activate the sprinklers, and the flow of the water generates electricity to power the LEDs, which project a laser-based holography pattern light. The lights can be positioned to illuminate evacuation routes.
For the $29 million, four-level addition to the University of Michigan’s Institute for Social Research Expansion, in Ann Arbor, the engineering team, led by MEP engineer Peter Basso Associates, utilized the building’s fire protection piping system to distribute chilled water to the chilled beams (pictured, below). The dual-function design eliminated approximately 70% of the piping normally associated with a chilled beam system, and reduced first cost by an estimated $500,000.
It is the first installation of its kind in the U.S., and it required that all components of the combined fire protection/chilled beam system be rated for a minimum 175 PSIG (pounds per square inch gage) operating pressure, according to Brian Runde, PE, LEED AP, VP with Peter Basso Associates. He says using chilled beams helped the project reduce overall building energy use by 37.2% versus an ASHRAE 90.1-compliant building.
Photo: Peter Basso Associates
Related Stories
Cladding and Facade Systems | Jul 20, 2017
FirstEnergy Stadium, home of the Cleveland Browns, may be covered in the same cladding as Grenfell Tower, AP reports
A luxury Baltimore hotel, a mixed-use building in Denver and an Alaskan High School may also have used the cladding.
Sponsored | Fire-Rated Products | Jul 19, 2017
London fire shines spotlight on fire prevention, protection and education
As shocking as the Grenfell Tower fire was, it is not an isolated incident.
Fire and Life Safety | Jun 22, 2017
After testing, seven tower blocks found to have similar cladding as Grenfell Tower
These blocks will undergo further testing to determine if they are safe.
Fire and Life Safety | Feb 8, 2016
American Wood Council releases construction fire best practice manuals, website
The manuals provide information on preventing, reducing fire losses in buildings under construction.
Sponsored | | Nov 24, 2015
Fire rated doors: standards, testing and glazing requirements
There are several safe and economical alternatives to traditional wired glass for 20-45 minute vision lites
Sponsored | Fire-Rated Products | Oct 22, 2015
Made in the USA - America's Still the Place
We’ve found that sourcing products as local as possible maximizes the potential benefits to the American economy, which in turn benefits us.
Sponsored | Fire and Life Safety | Oct 13, 2015
Fire rated glass brings whimsical and reliable protection at children’s hospital
Highlights of the addition included 50 private patient rooms, family sleep and dining as well as playrooms, and a family resource center.