When Grant Thornton, LLP, moved its U.S. headquarters to the former Chicago Title & Trust Center in 2015, “its lease was saddled with a very dark, almost unusable area on their most important floor,” said Ken Novak, NCIDQ, Associate, Stantec Architecture.
The second floor of the now-named Grant Thornton Tower in Chicago’s Loop, would be the “town square” for the world’s sixth largest accounting firm. The space, which the firm hoped to use as a gathering place for employees and clients, had no access to daylight. It was essentially a long, dark corridor. Stantec’s design vision was to open up a gypsum covered, fire-resistive wall to allow copious light into the space, as well as provide visibility to the lobby below and out to the Thompson Center and City Hall across the street.
Introducing daylight, though, was “problematic due to the codes regarding separation of the lobby from the tenant space,” explained Novak. The architects had “given up on the idea of daylight flooding the space,” until they found their solution with Fireframes® Curtainwall Series frames and Pilkington Pyrostop® fire-resistive-rated glass from Technical Glass Products (TGP). “The system provided the fire rating needed, with an all-glass look,” said Sean McEneaney, President, Glass Concepts, LLC, the glazier for the project, who has used the TGP solution in several Chicago-area projects.
The project team replaced an 84-foot (25.6 m) long drywall partition with approximately 821 square feet (76.3 m2) of two-hour fire-resistive curtain wall frames and glass. By changing an opaque wall into a clear one, the result is a welcoming, light-filled space that is “very popular and one of the showstoppers in the building,” notes Novak. “The TGP system allows design ideas such as ours to become reality.”
In addition to the fire-rated system’s look and performance, Novak explained that working with TGP helped streamline the project in several ways. First, because the system has been used in other Chicago projects, “that goes a long way to getting city hall to sign off.” Second, one of the challenges with converting the drywall partition to glazing was the need to accomplish the work 20 feet (6 m) above an active office building lobby. “By working with Leopardo (general contractor), Glass Concepts and TGP, we came up with an innovative solution to install the system backwards, so all of the work could be done on the second floor instead of working in lifts for months and months on overtime at great expense.”
Fireframes Curtainwall Series frames are available with fire ratings up to 120 minutes, and feature narrow profiles to reduce sightlines. The UL classified and labeled steel frames enable large expanses of glass in interior and exterior applications. Also available with up to 120 minute fire ratings, Pilkington Pyrostop glazing is impact safety rated (CPSC 16CFR1201 Category I and/or Category II) and blocks the transfer of radiant and conductive heat.
For more information on Fireframes Curtainwall Series and Pilkington Pyrostop, along with TGP’s other fire-rated glass and framing, visit www.fireglass.com.
Project: Grant Thornton Tower
Location: Chicago, IL
Architect: Stantec Architecture
Glazier: Glass Concepts, LLC
Product: Fireframes® Curtainwall Series frames and Pilkington Pyrostop® fire-resistive-rated glass
Photography: Chris Barrett
Technical Glass Products
800.426.0279
800.451.9857 – fax
Related Stories
Sponsored | Fire-Rated Products | Jul 19, 2017
London fire shines spotlight on fire prevention, protection and education
As shocking as the Grenfell Tower fire was, it is not an isolated incident.
Sponsored | Fire-Rated Products | Jun 13, 2017
Fire resistive glass floors make a dramatic statement in Nashville’s historic neighborhood
SAFTI FIRST supplied a single glass unit comprised of non-slip rated Starphire tempered laminated Glass with 1/8” Non-Skid White Dots from Oldcastle insulated to custom SuperLite II-XL fire resistive glazing.
Sponsored | Fire-Rated Products | Jun 13, 2017
Hidden risks and costs of using sprinklers as an alternate to 1-2 hour fire resistive glazing
The ASTM E-119 test is the most stringent and most difficult test to pass for all fire rated glazing assemblies.
| Jun 5, 2017
Fire-rated frames deliver the natural look of wood
The TimberLine Series pairs a high-strength steel subframe with a wood-veneered metal cover cap to produce a slender fire-rated frame.
Sponsored | Fire-Rated Products | Mar 22, 2017
Fire resistive glazing systems provide architects, owners and envelope consultants assurance of documented performance
It may look like a regular window, but these advanced fire resistive glazing systems are recognized in the code as transparent walls because of its ability to block smoke, flames and significantly limit the passage of dangerous radiant heat.
Sponsored | Fire-Rated Products | Nov 10, 2016
Truly transparent: Fire resistive butt-glazed walls up to 2 hours
SuperLite II-XLM is a fire resistive multi-laminate glass product that meets ASTM E-119/UL 263/NFPA 251 and CAN/ULC S101 up to 2 hours.
Sponsored | Fire-Rated Products | Nov 3, 2016
Fire rated switchable glass provides privacy and fire protection at the University of Chicago Medical Center
The University of Chicago Hospital Group reached out to Bill Zientarski of Hi-Performance Glazing Solutions and SAFTI FIRST’s architectural representative in Illinois for a solution that combined vision, privacy and fire protection in one glazed unit.
Sponsored | Roofing and Fire Safety | Sep 21, 2016
Metal roofing provides exceptional fire resistance
Buildings with great fire resistance will likely have lower insurance costs and be restricted by fewer codes, owing to the decreased risk.
