flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

6 innovative products for multifamily developments

Products and Materials

6 innovative products for multifamily developments

Efficient products make for efficient buildings. What are some innovative products to come out of 2022?


By Robert Cassidy, Executive Editor | January 18, 2023
High-rise glass building with solar R100 glass
This 164-condo Austin high-rise features floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. Photo courtesy Albert Vecerka/Esto

Each year, new products come on the market that solve developmental pain-points. Here are six innovative products for various multifamily developments, including a condominium-wide smart electrical system, heavy-duty aluminum doors, and prefabricated panels.

1. Solarban R100 (Architectural glass that counters the strong Texas sun)
 

Architectural glass counters strong Texas sun
Photo courtesy Albert Vecerka/Esto

Austin's new 34-story 70 Rainey houses 164 condos featuring floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. "Glazing selection on tall buildings is one of the most complicated design decisions we face today to navigate energy codes, aesthetics, and environmental performance," said Joshua Coleman, AIA, LEED AP, Principal/Design at Page architecture firm. "Solarban R100 glass provides one of the best solar heat gain coefficients on the market without being overly reflective, too dark, or tinted." Win-Con was the glazier.

 

2. Leviton Decora smart devices (Smart electrical systems for luxury residences in upstate N.Y.)
 

Smart electrical systems for luxury New York residence
Photo courtesy Leviton

Bonacio Construction (GC) and Prediletto Electric (electrical contractor) specified Leviton Smart Circuit Breakers and Leviton USB Type A/Type-C In-Wall Outlet Charger with 15A Tamper-Resistant Outlet for The Moderne Condominiums, Sarasota Springs, N.Y. Leviton Decora Smart Dimmers were installed in the living rooms, kitchens, and dining rooms of the two- and three-bedroom condos and in the penthouse units.

 

3. Omega-Lite ACM panels (Philadelphia apartment building clad in ACM panels)
 

Philadelphia apartment building clad in ACM panels
Photo courtesy Makosh Services, Laminators

For the exterior of SOLO on Chestnut, a seven-story, 250,000-sf complex of 280 luxury apartments near the University of Pennsylvania and Drexel University, JKRP Architects (designer) and The HOW Group (GC) specified 14,600 sf of Charcoal Grey Omega-Lite ACM panels. Makosh Services used Laminators' Clip & Caulk installation system.

 

4. Aluminum Swing Terrace Door (Aluminum door for high-rise, high-wind applications)
 

Aluminum door for high-rise, high-wind applications
Photo courtesy Crystal Window & Door Systems

Crystal Window & Door Systems' Series 1450/1460 Aluminum Swing Terrace Door has been structurally and thermally enhanced and offers a new hydraulic closer, glazing, and a laboratory water-tested ADA low-sill option. The Series 1450/1460 Terrace Door is constructed with heavy-duty 0.093-inch wall thickness extrusion and a redesigned strong multi-chamber 3.25-inch jamb frame, for use in high-rise and wind-prone installations.

A powerful adjustable hydraulic closer from leading German hardware manufacturer G-U (Gretsch-Unitas) features a concealed mounting plate and slide arm assembly designed for outswing door operation, which allows effortless operation of the door while maintaining the door’s sleek look on the interior. The aluminum frame of Crystal’s Series 1450/1460 Aluminum Swing Terrace Door is finished in durable environmentally sustainable powder coat paint, to either AAMA 2604 or 2605 performance standards.

 

5. Centerline Prefab uses Sto prefab panels to save time on WMU student housing complex
 

Prefabricated panels being put onto student housing development
Photo courtesy Centerline Prefab

Centerline Prefab set 48-foot StoPanel Metal ci panels on the upper four floors and Sto Backup panels for the six-story Arcadia Flats residential housing at Western Michigan University, in Kalamazoo. The 206 wall panels were prefabricated off site and installed on site in 37 minutes per panel. Stantec Architecture (architect) and Triangle Associates (GC) were on the project team.

 

6. Atlas ACFoam (Roofing system that prevents ice jams in Colorado project)
 

Roofing system preventing ice jams in Colorado development
Photo courtesy Atlas Roofing Corp.

Jeff Johnston, president of The Roofing Company, Granby, Colo., installed more than 210 squares of Atlas ACFoam and ACFoam CrossVent from Atlas Roofing Corp. on the roof of the nine residences and six penthouses ($7.4 million to $9.6 million) at the Vail Mountain View Condos, in Vail Village. The roofing system provided a fully continuous insulation solution with an R-value of 20.

Related Stories

BIM and Information Technology | May 8, 2023

3 ways computational tools empower better decision-making

NBBJ explores three opportunities for the use of computational tools in urban planning projects.

University Buildings | May 5, 2023

New health sciences center at St. John’s University will feature geothermal heating, cooling

The recently topped off St. Vincent Health Sciences Center at St. John’s University in New York City will feature impressive green features including geothermal heating and cooling along with an array of rooftop solar panels. The geothermal field consists of 66 wells drilled 499 feet below ground which will help to heat and cool the 70,000 sf structure.

Mass Timber | May 1, 2023

SOM designs mass timber climate solutions center on Governors Island, anchored by Stony Brook University

Governors Island in New York Harbor will be home to a new climate-solutions center called The New York Climate Exchange. Designed by Skidmore, Owings & Merrill (SOM), The Exchange will develop and deploy solutions to the global climate crisis while also acting as a regional hub for the green economy. New York’s Stony Brook University will serve as the center’s anchor institution.

Green | Apr 21, 2023

Top 10 green building projects for 2023

The Harvard University Science and Engineering Complex in Boston and the Westwood Hills Nature Center in St. Louis are among the AIA COTE Top Ten Awards honorees for 2023. 

Higher Education | Apr 17, 2023

Rider University opens a 'Zen Den' for restoring students' mental well-being

Rider University partnered with Spiezle Architectural Group to create a relaxation room for students, dubbed "The Zen Den."

Higher Education | Apr 13, 2023

Higher education construction costs for 2023

Fresh data from Gordian breaks down the average cost per square foot for a two-story college classroom building across 10 U.S. cities.

Urban Planning | Apr 12, 2023

Watch: Trends in urban design for 2023, with James Corner Field Operations

Isabel Castilla, a Principal Designer with the landscape architecture firm James Corner Field Operations, discusses recent changes in clients' priorities about urban design, with a focus on her firm's recent projects.

Market Data | Apr 11, 2023

Construction crane count reaches all-time high in Q1 2023

Toronto, Seattle, Los Angeles, and Denver top the list of U.S/Canadian cities with the greatest number of fixed cranes on construction sites, according to Rider Levett Bucknall's RLB Crane Index for North America for Q1 2023.

University Buildings | Apr 11, 2023

Supersizing higher education: Tracking the rise of mega buildings on university campuses

Mega buildings on higher education campuses aren’t unusual. But what has been different lately is the sheer number of supersized projects that have been in the works over the last 12–15 months.

Contractors | Apr 10, 2023

What makes prefabrication work? Factors every construction project should consider

There are many factors requiring careful consideration when determining whether a project is a good fit for prefabrication. JE Dunn’s Brian Burkett breaks down the most important considerations. 

boombox1 - default
boombox2 -
native1 -

More In Category


Mass Timber

Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas

Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021