flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

NFPA develops business reopening checklist for fire and life safety measures

Fire and Life Safety

NFPA develops business reopening checklist for fire and life safety measures

The new checklist helps building owners and facility managers ensure fire and life safety as businesses prepare to re-open amid the coronavirus pandemic. 


By NFPA | June 9, 2020
NFPA develops business reopening checklist for fire and life safety measures

The new NFPA resource addresses the factors that should be confirmed by a qualified person before re-opening a building to ensure the safety of all its occupants. Photo: Silviu Costin Iancu from Pixabay

   

 

As the federal government and many states begin allowing businesses to reopen, the National Fire Protection Association (NFPA) has developed a checklist to help building owners and facility managers prepare, ensuring that fire protection and life safety systems in commercial and multi-occupancy residential buildings are properly checked and functioning.

“During the lockdown policies in place over the past couple of months, many of the ongoing inspection, testing, and maintenance (ITM) activities typically required by locally enforced codes and standards may not have been completed for a variety of reasons,” said Val Ziavras, technical services engineer at NFPA. “Regardless of the level of ITM performed during this time, it is imperative that building owners and facility managers verify the performance of all building fire protection and life safety systems prior to reoccupation.”

The new NFPA resource addresses the factors that should be confirmed by a qualified person before re-opening a building to ensure the safety of all its occupants. Based on the assumption that the building was in compliance prior to being closed, the checklist provides some initial steps to help make sure the occupancy is safe enough to reopen until a qualified professional can complete the regularly scheduled ITM of all fire protection and life safety systems. Ziavras notes that this process should be completed as quickly as possible.

“Any alterations to the building that adhere to public health guidelines, such as the installation of physical barriers or automatic door openers, will need to be evaluated to ensure that they are properly designed and installed and do not negatively impact the fire protection and life safety systems currently in place,” said Ziavras.

The newly available checklist reflects the latest in a series of COVID-19 related resource developed by NFPA to address fire and life safety issues, concerns, and challenges that have emerged over the past couple of months. 

Related Stories

Codes and Standards | Jun 18, 2015

Two myths regarding NFPA 101 Life Safety Code debunked

NFPA life safety engineer Ron Coté settles the debate over second egress doors and exit signs.

Codes and Standards | Jun 18, 2015

How to prevent corrosion in sprinkler system piping

The technical committees responsible for NFPA 13, Installation of Sprinkler Systems, have been looking at ways to eliminate or reduce corrosion in sprinkler systems for several revision cycles.

Sponsored | Fire-Rated Products | Jun 2, 2015

Is fire rated glass expensive?

Where product selection has the most impact on cost is also the area where the majority of fire rated glass is being used, which are 20 minute doors and 45 minute sidelites, transoms, and openings.

Fire and Life Safety | May 27, 2015

7 bold applications and innovations for fire and life safety

BD+C’s roundup features colorful sprinklers for offices, hotels, museums; a fire-rated curtain wall at a transit hub in Manhattan; a combination CO/smoke detector; and more.

Sponsored | Fire-Rated Products | Apr 14, 2015

Fire resistive curtain wall brings maximum light, views and safety to Aspen Art Museum

The curtain wall used for the Shigeru Ban-designed museum provides maximum daylight while protecting the art from fire

Sponsored | Fire and Life Safety | Apr 1, 2015

Radiant Heat: The Invisible Killer

Where there’s smoke, there’s fire. Where there’s fire, there’s the deadly threat of radiant heat.

Fire-Rated Products | Feb 3, 2015

AIA course: Fire and life safety in large buildings

Earn 1.0 AIA/CES learning units by studying this article and successfully completing the online exam.

| Jan 20, 2015

Whitepaper shows hospitals how to investigate and resolve fire wall breaches

A pilot program that rapidly identified and resolved fire and life safety deficiencies during construction and renovation projects at Brigham and Women’s Hospital is detailed in a new whitepaper from EH&E.

Sponsored | | Dec 30, 2014

First-class glass: Designing for fire safety in schools

As more students enter the school system each year, designing for fire safety in educational facilities has never been more critical. Fire-rated glazing can be a key part of the solution.

Sponsored | | Dec 11, 2014

Fire rated glass contributes to Salt Lake City Public Safety Building’s sustainable and resilient design goals

One of the most exciting new buildings to open its doors this year is the Salt Lake City Public Safety Building Salt Lake City, Utah. This $125 million, 335,000-sf facility blends sustainability and resiliency under one roof. SPONSORED CONTENT

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021