Let’s discuss the Energy Star Multifamily High-Rise Program

The demand for rental housing has been on a steady climb since 2004.

January 05, 2018 |
Abundance: The Paladino Blog

In a construction market that has been slowly recovering since the end of The Great Recession, multifamily housing has been the brightest star. The demand for rental housing has been on a steady climb since 2004 (Source: Freddie Mac).




But the demand for rental housing is growing while the income level of renters is falling. Renters need to save money on their housing costs, and the cost of utility bills is increasingly important to renters who can’t afford high utilities.


Introducing EPA ENERGY Star for Multifamily High Rise

The LEED rating system is well established as a way to verify that buildings are designed to environmental standards, and a LEED certification can either compliment other back-checks or stand alone. Developers and local jurisdictions are increasingly open to an alternative approach to validating green building strategies.

One new approach comes from the U.S. EPA, which has introduced a program called the ENERGY STAR Multifamily High Rise (MFHR) Program (New Construction). The program’s guidelines allow developers of multifamily high-rise buildings to earn the familiar and respected ENERGY STAR certification for their buildings.

The MFHR program applies to buildings six stories or higher because buildings under six stories can use the ENERGY STAR Certified Homes Program. Buildings of four to five stories can use the MFHR program if they have central HVAC and domestic hot water, and dwelling units that take up less than 80% of the occupiable square footage of the building. The project must also be registered on ENERGY STAR’s Portfolio Manager, and the developer must track and report energy performance for the first two years, although the building’s performance will not take away the ENERGY STAR certification that it received.

The ENERGY STAR for MFHR program has a narrower focus than LEED, and only considers energy use and hot water conservation. LEED, on the other hand, covers energy usage, water conservation, site development, indoor environmental quality, and materials – all of which provide great environmental benefits.

Renters who are concerned about utility costs may find that an ENERGY STAR certification gives them confidence that the property’s operators are doing what they can to keep costs down – but using it as a back-check on sustainability strategies will only provide a limited view on total environmental impact.



The first step in developing an ENERGY STAR for MFHR certified building is to become a residential new construction partner by completing an online form on the ENERGY STAR website.

If you are designing your building to follow the performance path, you must show that the building achieves at least 15% energy cost savings over a code minimum ASHRAE 90.1 building through an energy model. If you are following the prescriptive path, there are minimum levels of efficiency that must be met related to HVAC equipment, insulation, doors, and glazing. There are additional requirements related to the HVAC, building envelope, plumbing systems, lighting, and motors.

For both paths, there are prerequisites that must be met, which are like the mandatory provisions of ASHRAE 90.1. A project gets submitted to ENERGY STAR at the close of both the design and construction phases. For the design submittal, you provide the proposed energy model, and testing and verification worksheets. The as-built submittal (or your post-construction submittal) includes an as-built performance path calculator with any changes made since design, testing and verification worksheets, and a photo template, which provides evidence that all requirements have been met in the building. These are submitted to ENERGY STAR and must be verified by either a professional engineer (PE) or a registered architect.

Abundance: The Paladino Blog | Paladino and Company

Paladino and Company is a sustainability consulting firm that works with organizations seeking to make a difference through their buildings and people. Abundance, written by our team of architects, engineers, building scientists, commissioning agents and business analysts, reflects our rigorous business and building technical analysis centered on the concept of abundance as a driving force for change.  Our consultants offer insights, expertise and vision on sustainability and how to realize its business value. For more, visit http://www.paladinoandco.com/blog/.

Related Blogs

January 15, 2018 | Green | Paladino and CompanyKim Pexton

The DOE Better Buildings Initiative has made a bold statement calling 2018 the “Year of the Lease”.

October 30, 2017 | Multifamily Housing | Paladino and CompanyDarren Bruce

What's the right set of "lungs" for your building?

A closeup of markers lined up on a surface
October 02, 2017 | Green | Paladino and CompanyDarren Bruce

After performing retro-commissioning and energy audits for more than five million square feet of existing b...

July 12, 2017 | M/E/P Systems | Paladino and CompanyBrian Atkinson

Maintenance and engineering managers need to monitor the condition of their equipment and the workloads of...

June 22, 2017 | Building Team | Paladino and CompanyBrian Walker

Commissioning is where the rubber meets the road in terms of building design.

May 18, 2017 | Paladino and CompanyAmanda Cunningham

If you want LEED EB O&M to do more for your building, then consider these four opportunities that might...

Key West, Florida under water

March 08, 2017 | Paladino and Company Deborah Hanamura

Extreme weather heavily impacts our infrastructure and real property, creating unique issues for developers...

January 31, 2017 | Transportation & Parking Facilities | Paladino and CompanyAmanda Cunningham

In 2014, Americans spent an average of 42 hours per year sitting in traffic jams.

Overlay Init