A grant program funded by ASHRAE will go to promote the study and teaching of HVAC&R, and to encourage senior undergraduate students to pursue related careers.
The ASHRAE Undergraduate Senior Project Grant initiative awarded funds to 24 schools around the world. The grants totaled $110,000. Undergraduate students at the University of Alabama will use their award to develop an aerial vehicle to conduct building energy audits.
The goal of the project is to build a co-robot (human controlled with robotic assistance) quadcopter with onboard sensors including infrared temperature camera, visible light camera, heat flux sensors, direct temperature probes and location and orientation.
“The vehicle would be used to quantify envelope characteristics of hard-to-reach and large regions on modern buildings,” Zheng O’Neill, Ph.D., of the Mechanical Engineering Department and advisor of the project, said. “The information will provide engineers with systematically measured control volume characteristics. For example, infrared thermal camera data will provide information of building envelope temperature, which can be used for building infiltration diagnostics.”
Related Stories
HVAC | Nov 12, 2015
LG Electronics opens expanded headquarters for thriving U.S. air conditioning systems business
Cutting-edge facility aims to connect and educate contractors, engineers and industry leaders, boost local economy
HVAC | Sep 25, 2015
Does over-designing HVAC systems make for inefficient, uncomfortable spaces?
Reliance on outdated standards at odds with sustainability
Sponsored | | Jul 15, 2015
Get a Higher Return on Your Retrofit Investment with New Building Envelope Analysis Service
Sponsored | Insulation | Jun 18, 2015
A modern approach to continuous insulation
The poject included replacing the original residence halls built in the 1970s
Sponsored | Transit Facilities | Jun 15, 2015
Success through teamwork for landmark California project
The Anaheim Regional Transportation Intermodal Center (ARTIC) is the Grand Central Station of the future
HVAC | Feb 6, 2015
ASHRAE, REHVA publish guide to chilled beam systems
The guide provides tools and advice for designing, commissioning, and operating chilled-beam systems.
Brick and Masonry | Feb 5, 2015
3D-printed 'cool brick' may provide cooling solution for arid locations
Cool Brick is made of porous ceramic bricks set in mortar. The bricks absorb water, which cools the air as it passes through the unit.