BIM and Information Technology

BIM and IT are subject matter that every member of the building team should have some kind of handle on, and that everyone can derive some benefit from. Whether it’s an app to help with cost control or an optimized building design achieved through BIM, these technologies can bring your projects to the next level and beyond.
Rendering: RMF Engineering
August 14, 2014 | Seth Spangler, PE, LEED AP BD+C, BEMP

There are many hurdles to overcome when completing a life cycle cost assessment. RMF Engineering’...

read more
Rendering: RMF Engineering
August 14, 2014 | Seth Spangler, PE, LEED AP BD+C, BEMP

A life cycle cost analysis helps a school district decide which HVAC system to use in $198 millio...

read more
To support rapid iterative design approaches on the 30,000-seat Al Meena Soccer
August 04, 2014 | David Barista, Editor-in-Chief

Cloud-based data sharing, rapid iterative design, and cross-discipline collaboration are among th...

read more
Photo: BQE Software
July 30, 2014 | BQE Software This is Sponsored Content

Foreman Seeley Fountain Architecture not only managed to survive the Great Recession, it has posi...

read more
July 11, 2014 | BD+C Staff

Kite Bricks proposes a more efficient way of building with its newly developed Smart Bricks syste...

David Benjamin, owner and founder of The Living. Photo courtesy of Autodesk.
June 30, 2014 | BD+C Staff

The Living, David Benjamin's design studio, has been acquired by Autodesk. Combined, the two will...

read more
Photo courtesy of CGLA Infrastructure.
June 30, 2014 | CGLA Infrastructure

The ASCE estimates that $3.6 trillion must be invested by 2020 to make critically needed upgrades...

read more
Using 3D printing, Arup engineers were able to design and fabricate this lightwe
June 18, 2014 | Arup

The firm's research shows that 3D printing has the potential to reduce costs, cut waste, and slas...

read more
Jevon Carrington and Leila Schey, both Architectural Designers in Genslers Wash
June 11, 2014 | David Barista, Editor-in-Chief

In search of a fast rendering solution, Gensler looked to the gaming and moviemaking industries f...

read more
The city of Buffalo hired a team of professionals to execute assessments for mor
June 08, 2014 | Joseph Cassata, AIA, CannonDesign

Over the past few years, Buffalo has developed a cutting-edge facility management program to ensu...

read more
May 29, 2014 | BD+C Staff

Funded through Kickstarter, iSketchnote uses a smart pen to instantly digitize hand-written notes...

read more
May 23, 2014 | Ryan Schultz & Timothy Connor, SPARCH

Data center design specialist SPARCH creates a modular scheme for solutions provider Digital Real...

read more
Set to open next month, the $75 million, 215,000-sf Kamloops Internet Data Centr
May 23, 2014 | David Barista, Editor-in-Chief

Building Teams are employing a range of creative solutions—from evaporative cooling to novel hot/...

read more
Integrated Design Group incorporates computational fluid dynamic (CFD) simulatio
May 23, 2014 | David Barista, Editor-in-Chief

Here’s where AEC firms and owners are getting the most bang for the buck when using BIM/VDC to co...

read more
Facebook Data Center, Lule, Sweden
May 23, 2014 | David Barista, Editor-in-Chief

The demand for sophisticated facility monitoring solutions has spurred a new market segment—data...

read more
The contractor implemented advanced prefabrication measures on the 360-bed Exemp
May 14, 2014 | Mortenson Construction

Value-based cost-benefit analysis of prefab approaches on the firm's 360-bed Exempla Saint Joseph...

read more
By employing advanced prefabrication techniques, the Building Team for the 840,0
May 09, 2014 | David Barista, Editor-in-Chief

Leading AEC firms offer helpful advice for using BIM to pull off prefab for everything from MEP i...

read more
The Anaheim (Calif.) Regional Transportation Intermodal Center, designed by HOK,
May 01, 2014 | BD+C Staff

Thom Mayne's Perot Museum of Nature and Science and Anaheim's new intermodal center are among the...

read more
Sasaki's MyCampus interactive mapping program
April 23, 2014 | Chris Sgarzi, Sasaki Associates

Advanced methods of data collection, applied both prior to design and after opening, are bringing...

read more
April 10, 2014 | Bluebeam

Bluebeam is holding the second annual Bluebeam eXtreme Awards at the 2014 Bluebeam eXtreme Confer...

read more
April 02, 2014 | Autodesk

The Autodesk InfraWorks 360 family of offerings now includes enhanced roads and highways capabili...

read more
Having the correct model views loaded and visibility settings adjusted prior to
March 31, 2014 | David Barista, Editor-in-Chief

Process mapping, split models, and streamlined coordination meetings are among the timesaving tec...

read more
Hadid calls the plaza a "green oasis" in the midst of the urban Dongdaemun distr
March 26, 2014 | BD+C Staff

The new space, the Dongdaemun Design Plaza, is a blend of park and cultural spaces meant for the...

read more
March 12, 2014 | CannonDesign

The new software identifies critical failures of components and systems, code and ADA-compliance...

read more
March 10, 2014 | KieranTimberlake

Tally provides AEC professionals with insight into how materials-related decisions made during de...

read more
Caterpillars Cat B15 rugged smartphone
March 10, 2014 | BD+C Staff

The B15 is billed by Cat as “the most progressive, durable and rugged device available on the mar...

read more
Photo: iBackFlip Somersault
March 10, 2014 | David Barista, Editor-in-Chief

BD+C readers share their most trusted smartphone and tablet cases. The editors select some of the...

read more
The Rombald team
March 06, 2014 | BQE Software

By replacing spreadsheets with BillQuick, this growing consulting firm has greater visibility int...

read more
Greg Miller used the Unity coding language to create "Jerry's Place." All render
March 06, 2014 | BD+C Staff

Fans of the show can now explore a virtual 3D model of the iconic New York residence, thanks to o...

read more
This CFD model depicts thermal stratification within a conference room to assess
February 27, 2014 | Jason Pfeiffer

From right-sizing mechanical systems to understanding the impact of design alternatives, CFD offe...

read more
Overlay Init